How to install Siemens Speedstream 4100 Modem manual installion
Hi,
* You dont need any special drivers to install modem.
* Open up internet explorer, type 192.168.0.1 in the address bar and press enter key.
* Now you should see the configuration page of modem.
* On the left side, click on Advanced button, below that, you will see "connection configuration" option - click on it.
*** If it asks for modem access code anywhere, you can find the code underneath the modem. please type it ***
* Under this page, you have to enter the email address in username field and password, change the connection type to smart keep alive, click on save changes
* Now it may ask you for restart modem. click on restart. within 1 min, you will be connected to internet.
Take care
Control panel then add a hardware careful here it will not install unless you have the correct drivers if you have then installation will complete.
Maybe with this ?
Siemens Speedstream 4100 Manual
Ca nt acccess my modem to configure it with different addresses and afraid to lose my recent config if reset
10,098 views
Usually answered in minutes!
powercycle the modem
how do u manually install the speedstream modem
when the button is push to make the lights come on they wont come on.
modem not being detected-neither via usb nor via lan-ethernet while running dataone setup.-
steps taken-ethernet drivers installed from mother board disk,hardware connection checked and varified
other details-the led indicting data is off
i have the same problem. but when i go to internet explorer and type 129.168.0.1 i get a error message saying: internet explorer cannot open the search page.
×