I have connected the Brother MFC210C All-In-One Printer to my computer. I do not have a manuel for use instruction. When I try to print a document , the paper comes through as if printing but there is nothing on the paper when finished. Also the copy button won't stay on. The fax button pops back on. Is there any way I can get a copy of the manuel?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check if everything plug good, if yes and still not working, go to control panel, click on printer to see if it is in the system, if not you need to install it, if yes it already in the system, unplug the printer for few minutes and plug it back .
my mfc210c will not obey command to print multiple copies anymore. I don't know why. It never happened previously. If I ask for 2 or 3 copies, I only get 1 copy.Also, I don't know why the Contro Center no longer shows on my DeskTop and why I can't instanll it in my task bard below. It used to work just fine.
Error "unable to clean" on Brother MFCHi there Solution: ·Machine off ·Switch on the machine while holding down the “menu”button until all the leds are flashing on/off. Now you are in “maintenance” mode. ·Press 80 ·Press the “mono start” button several times until you see “purge: xxxx” ·Press “2783” in order to reset the purge counter. You will see: “purge:0000” ·Press the "stop" button. ·Press “99” to exit the maintenance mode. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
I have a Windows Vista laptop an am trying to install aBrothers MF 210C.
The computer recognizes the printer but I can not print a test page. What mode
am I supposed to be in and how do I program the printer to receive from the laptop?
I believe your brother printer uses one driver for fax/scan and another driver for printing. It might seem like you haven't installed the printer driver, only the fax/scan driver. You should find the driver file and the instruction on this brother.com page:
PS: the driver linked to above is for os 10.4. You might want to search for a different version if you have a newer/older OS.
If the link doesn't work, search for the driver from brother.com's site and download and install the driver by following their 12 points instruction. Good luck!
if your brother machine is within warranty, give the tech support a call. if not,replace the black cartridge with a new one. it may be a defective cartridge that you have or if you are using refilled cartridges, it will also give the same problem