Ok the only website you will need to sort out your problems on flashing lights - I kinda liked them when i switched my room lights off. anywayz here's the site:
http://www.eserviceinfo.com/index.php?what=search2&searchstring=EPSON+RX420-425-430
under the heading 'file' you shall find your program (R265 RESET.rar). click on it then another page shall load, go right down to the bottom it will say Download >> To download the file, please, click here ! << Download
well there you go the direct link to download the program no need to go through the website.
Over and Out guys.
i forgot to say something.
before you any of what i said you need to do this first.
change your computer date to 20th january 2007.
then download.
open program Adjprog.exe
1. click accept
2. click perticular adjustment mode
3. highlight waste ink pad counter then press ok
4. tick/check both main pad counter & platen pad counter and press check
5. then press intialization
6. turn your printer off
7. now turn your printer on again
8. check both main and platen pad counters and press check again WALLA 0 again.
your printer is working again.
and dont forget your printer needs to be on when you are doing this.
cheers i hope this helps who ever needs this help and dont forget to say thankyou very much. bye bye.
This man is a star!!!! Been searching the internet for ages with no luck, then stumbled on this. Done exactly what he said (including changing the date) and it WORKED!!! Thanks a million.....
×
Switch off the printer. clean out the waste ink pad with several ink buds after CAREFULLY moving the cartridge carriage to the left. switch on the printer. hey presto. job done. well it worked for me
Try ebay someone is selling one on there looks good
item number 220203942423 or 220204691585
worth a go as nothing else out there is working
Download {free} R265 RESET
READ ALL DETAILS FIRST
THIS WORKED GREAT 4 ME
Before you any of what I said you need to do this first.
Change your
computer date to 20th January 2007.
Then download.
Open program
Adjprog.exe
1. Click accept
2. Click perticular adjustment
mode
3. Highlight waste ink pad counter then press ok
4.
Tick/check both main pad counter & platen pad counter and press
check
5. Then press intialization
6. Turn your printer
off
7. Now turn your printer on again
8. Check both main and
platen pad counters and press check again WALLA 0 again.
11,880 views
Usually answered in minutes!
Please,send me the software for the problem with resetting the ink flow on r265. e-mail: [email protected]
hi, i need the rest fix for my r265
thanks
[email protected]
Hello ... Me too :-) anyone got a fix yet ? HELP
Epson R265 overflow inkpad reset
Red lights flashing and green light stays off.
Both redlights are flashing, and I need to change the waste ink
e-mail me on [email protected] Please
Hi all .See that we all have the same problem with the R265.Can anyone help as I have looked through the web and found nothing.You guys are my only hope.
[email protected]
counter needs resetting epson r265
i have same problem with EPSON Stylus R270
please help me!!!
Both redlights are flashing, and I need to change the waste ink can any one help me please
BOTH red light are flashing i need help pleaseeeeeeeeee!
please send fix for resetting the ink overflo counters for the epson r265
epson r265 saying service due
hi
got an epson r 265 and installed the ssc utility program to reset the counter, but the red lights keep flashing
hi
got an epson r 265 and installed the ssc utility program to reset the counter, but the red lights keep flashing
HAVE 2 FLASHING RED LIGHTS AFTER CHANGING INKS. PRINTER WAS SAYING SERVICE REQUIRED. I HAVE TRIED RESETTING COUNTERS BUT STILL HAVE THE 2 LIGHTS, I USE SSC SERVICE UTILITY BUT STILL NO JOY
both red lights flashing
if the red lights are flashing the posted solution will NOT work.
×