Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

I turn on my maching and the door locks, but nothing else happen

The lights come on, the door locks, but nothing else happens. I thought it was the belt, but when i took off the back the belt was intact. I don't know if it is the motor, or a reset button? If there is a reset button?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem within my 1 year warranty. I called the company and they sent out a repairman. Apparently, there is a magnet in the drawer that lets the machine know the drawer is closed and it is safe to start the cycle. If the magnet isn't there the machine doesn't think the drawer is closed and won't start. The repairman simply had to replace the magnet and the washer started after that.

Posted on Apr 15, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starting problems


have you cheked there isnt a falty conectshon on the battary leads

Sep 25, 2013 | Kia Sedona Cars & Trucks

1 Answer

SUV won't start, nothing happens when I turn the key


Very likely bad battery. Most places that sell them will install for free.

Dec 27, 2012 | Suzuki XL7 Cars & Trucks

5 Answers

My Hoover Optima OPH 714 D washing machine won't start


Hope your tried switching off the machine for half to one hour, to re plug. Machine might re-set.
If helped, pl click, it could help others.

Dec 07, 2009 | Bosch Washing Machines

2 Answers

Power light is on but nothing happens - indesit iwme12


If the door does not lock at this point it probably needs door lock replacing

Sep 05, 2009 | Washing Machines

1 Answer

Door won't unlock


try the cancel button it will drain the water and release the lock

May 30, 2009 | Maytag Neptune MAH9700 Front Load Washer

2 Answers

Key fob won't unlock or lock car VW Golf 2000


You probably caused a short circuit when you changed the light. Change fuse #14. Next time, don't turn the lights on until you are finished changing the lights.

Mar 25, 2009 | 2000 Volkswagen GTI

1 Answer

Our 2002 VW Passat 5 spd. Lights come on, but doors won't lock


it sounds like your computer went bad, somethings do not go to the computer like the radio and lights but all the sensors, ignition system, and locks witch im going to guess that you have a car alarm. if not even thow the computer tells all the locks to lock with one push of a button. you would have to take it to a garage theres a chip that has to be removed and put in the other inless the chip is the promblom but unlikely

Feb 24, 2009 | 2002 Volkswagen Passat

1 Answer

GE PROFILE electric oven


Hello,
You are going to have to remove the back panel and manually turn the lock motor to release the door lock catch.   To chat with me live and walk you through how to repair this visit www.applianceoutletservice.com  Thanks, Bill

Oct 26, 2008 | Frigidaire FEF336BC Electric Kitchen Range

1 Answer

Washer filled with water then stopped


Same problem- quick fix- to release door anyway. Found the service manual online...First unplug power cord and remove bottom front panel. Reach underneath on the right side of the machine- there will be a white round plastic disk that you can pull downward to release the door lock and remove your wet clothes. I found a pen lodged inside which may have caused the 'glitch'. When I ran it again it did the same thing and locked at the same place. The service guy had to replace the door lock mechanism to permanently fix the problem.

Apr 16, 2008 | Frigidaire GLTF2940ES Front Load Washer

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...