Whenever the monitor is turned on, there is no regular display. Instead, all that appears is several vertical lines of mixed color.The rest of the screen, including between the lines, is blank.
Check that the signal cable from the computer is firmly connected and that there are no bent pins in either end. If the trouble continues, the problem is in the monitor itself. Given the low replacement cost, it's uneconomical to try repairing these.
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for Compaq TFT5015 15" LCD Monitor
proview 700p has good blend or proper colors except black but any black background or writing goes...
(More)
proview 700p has good blend or proper colors except black but any black background or writing goes to a greenish colored lines
when booting the pc, this has to be done soon after the monitor has gone to standby other wise it...
(More)
when booting the pc, this has to be done soon after the monitor has gone to standby other wise it never comes on
Samsung 2243 BWT 22" monitor Blanck, no image. I followed online instruction to troubleshoot,...
(More)
Samsung 2243 BWT 22" monitor Blanck, no image. I followed online instruction to troubleshoot, unplugged monitor signal cable but still did not get "check signal cable" figure.
i have put on a 10m svga lead to my monitor. when i start the pc up i can not get past the xp blue...
(More)
i have put on a 10m svga lead to my monitor. when i start the pc up i can not get past the xp blue screen (log on). it get this far and then i get the out of range message. when i am already logged on i can connect the 10m lead and everything works fine. i can also use the lead in safe mode. anybody got any answers ? i have tried changing the resolution and also the refresh rate 1