Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

I took the back panel off my front loader washer, then un hooked the hose it was good okay, the black rubbery thingy i squeezed it and there is something inside it can you tell me what is that rubbery black thing

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,294 Answers

The filter lies inside the big black hose, you can get it by unscrewing the top clamp. Clean out all the coins, hair, whatever evil and refit filter as you found it. You can disconnect other hoses with a grip plier to have better access. If you have difficulty in re-fixing with the spring clips you can refit with jubilee worm drive clips, any hardware store.

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Leaking maytag neptune washer


The pump and its various hoses are easily accessable through the back panel. The boot can collect coins which can block the pump. Squeeze the boot and empty it of all coins. Coins can ruin the impellers on the pump. A new pump costs $100 on line. The drain hose can be plugged by dimes and pennies. Good luck.

May 28, 2014 | Maytag Neptune MAH5500B Front Load Washer

2 Answers

Frigidaire front load washer code error E20


Hi, this error is caused by a clogged drain filter located under the drum assembly.


If your machine is stuck on the drain sequence or you read error code E20, the filter basket is probably clogged:
You will need a pair of slip-joint pliers and a Phillips head screwdriver.
Before beginning any work, make sure to unplug the machine from the electrical outlet.
**Note: It may be easier to perform this task with the washer lying on its side; therefore it may be necessary to disconnect the water lines from the machine.
1: Take off the front kick plate (two screws at the bottom of the machine).
3: There is a black accordion hose with two clamps.
2: Have a towel ready to catch the water that leaks.
4: Remove the clamps at each end to access the filter basket.
5: Stick your hand inside the hose and remove the plastic filter basket (it will probably be clogged with hair, lint, fabric).
6: Thoroughly clean the filter basket and remove all debris from the inside of the black accordion hose.
7: Replace the filter basket.
8: Reattach the black accordion hose at both ends.
9: Secure the clamps at each end of the hose.
10: Wipe up any water that may have spilled inside the machine.
11: Reattach the front kick plate with the two screws removed earlier.
12: Reconnect all hoses before plugging in the machine to the electrical outlet.


Thank you.

Jun 06, 2012 | Frigidaire ATF6000ES Front Load Washer

1 Answer

When i switch on the power of my karcher K2.38 power washer, the motor runs but there does not appear to be any increase in pressure, which means that it is ineffective when it comes to cleaning the patio/...


Hi and welcome to FixYa, I am Kelly/
First off, remove the water supply hose from the power washer and locate the in line filter. Most of them are a plastic screen stuffed into the plumbing just behind the hose washer. Others have a short stand off and the filter / screen may be where the stand off attaches to the pressure washer. Others units have in in line sump that usually has a blue or red cap that you remove to clean the sump. Find the filtering mechanism(s) and clean it.
After doing this... attach the water hose loose to the power washer and turn on the water supply hose. Wait for all of the air to purge from the water supply hose. Then tighten the water supply hose. After that... Squeeze the wand trigger until all the air purges out of the high pressure hose and you get a solid stream of water with the unit off. Once you get a solid stream of water with the unit off... power the unit up and see if the high pressure hose becomes rigid / charges with high pressure. Next.... cycle the wand trigger 1 second on... and then wait for the hose to charge again. Do this multiple times. What your doing is forcing the un-loader / relief valve to stroke in the pump. Until the un-loader valve stokes un-restricted; you will have pressure problems. Next after the hose is fully charged... cycle the wand trigger very rapidly until you get high pressure each time you cycle the wand trigger. At this point your done and can proceed with patio cleaning.

Should this NOT resolve your problem.... get as much water out if it as you possibly can and pour a few ounces of engine oil into the water inlet. (Easier said than done... but you have to get oil into the pump and then let it sit over night. once you have oil in the pump pull the recoil 2 times with the ignition off just to force oil through the pump)
The next day you go through the same routine as stated above. This brings about 80% of the stubborn ones back to life again. Should it still be fussy after doing all of the above... you will have to replace the unload-er valve. If you removed the un-loader valve for any reason... you must clean out the pump housing and lubricate it and the un-loader valve with white grease (<-Available at any automotive parts source) BEFORE reinserting either the old one or a replacement un-loader valve. If you attempt to use the old one with lubrication.. make sure to remove any debris from the springs and wipe the seals clean with a PAPER towel before lubrication.

Thanks for choosing FixYa,
Kelly

Apr 16, 2011 | Karcher K2.26 Electric Power Washer

3 Answers

Frigidaire Affinity ATF6000FS1 model I recently


E20 means clogged drain pump, slow drain . What you need to do is to remove the screws on the back that holds down the top panel and slide it back to remove then the 5 screws on the Ctr panel and pull that off and then remove the spring around the door seal on the front panel and remove the 4 screws on the bottom of the front panel and then the 2 screws for the Door catch on the front and then the 3 or 4 screws on the top part of the front panel to removed the front panel then underneath you will see a black rubber flexible hose coming off the tub loosen the ring clamp at the top of the hose with a Phillip screwdriver and reach in the hose and grab the filter on clean it out and reinstall and put everything back together and you should be all set

Jan 16, 2011 | Frigidaire Affinity ATF6000F Front Load...

1 Answer

How to unclog drain hose/pump? my front loader


First of start by checking the rubber gasket seals around the door and making sure those are good and clean and dry. Then inspect the barrel itself. My daughter loves to leave scraps of paper in her pockets that then get stuck in my front loader. Clear any debris from the barrel. Does your machine have a small front access panel or back access to get to the filter? Most front loaders have some sort of filter on them apart from the barrel. If you can find this part, it is a common culprit. Mine is a tube shaped basket with a front access panel on this one. On the front loader before this one is was back panel accessable under the drum. when you check these have a bucket and some thing mop up with handy, towels, mop, etc. One other thing to consider is the drain hose from the machine. I have flushed mine using a garden hose in the yard and used a little bleach.

May 12, 2017 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Fridigaire washer that won't spin


Now remove the two screws on the front lower panel and pull the panel
in side you will see the drain pump if you did not have a shop vac go to the auto parts store and buy a pair of radiator hose clamps and clamp the hose line as close to the washer as possible.(but put down some towels as water always stays there) then pull the tub to pump hose by depressing the squeeze clamp(now while your at the auto parts id get a screw clamp to replace the spring clamp it makes putting the hose back on a lot easier)pull the hose off.Then pull the pump to drain hose off .Remove the two 5/16 in screws securing the pump to the washer base.Unplug the connector and remove the pump inspect the pump for foreign objects,broken or stripped impeller blades . if the impeller are stripped you will have to replace the pump then form the front of the washer take a piece of water hose with one end cut off and run it down the pump to drain end of the drain and reassemble the unit

Mar 11, 2009 | Frigidaire GLTF1240A Front Load Washer

1 Answer

Frigdaire washer


ok no probelm..you have a front loader ,,first un plug unit,,now at your feet theres a toe panel,,3 screws remove them and the panel will slide down..now off to the cener left the thing with the little fan on front and the 2 black hose coming out,,1 hose lead out the unit to your drain and the other hose comes down from your tub...take that 1 of from your tub to pump but take it of from the pump ,,if its water in the unit ,,dip much as you can out and then put towel on the floor..now see whats jamming pump..im here for any questions,,,reverse to put together..onthejob

Jan 03, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

GE WJSE3110A washer, won't drain


On a scale of 1 -10, I'd rate this about a 3.5 in difficulty.
Un plug machine.
Use a putty knife to push the clips in at the seam of the front panel and the washer's top, about two inches in from each side to allow you to pull the front panel forward and then lift it off the bottom pegs.
If you took off that drain hose, you shouldn't have any water left in the machine, so take the two squeeze hose clamps off the pump hoses, the electrical wires off the pump, and the two 3/8 size bolts holding the pump to the washer's base.
Now check to see if the pump is plugged or obstructed with an object. Replace pump with cleaned out or new pump as necessary.

Dec 10, 2008 | GE WJSE3110A Top Load Washer

1 Answer

My Bosch 2060 Front end loader will not drain/spin


Get the pennies or dimes out of the accordian style black hose at the bottom of the washer. You will need to lay the washer against something so you can get in from underneath. Take a plyers and squeeze the medal clamp so the hose can slip off. I found 3 dimes that acted like washers. The machine will drain.

Jul 08, 2008 | Bosch Axxis WFL 2060 Front Load Washer

1 Answer

Front loader won't release water


Plug off the wall, open up the top to check hoses coming from the inlet side. If your hose here is okay, check your receiver trays. If all this is fine, you have to change your water valves at the inlet side of your machine; before that check the connections to the valves.

It would be good to check all connections, for vibrations are a common problem. The connections should be tight.

Pl rate if helped...............

Dec 31, 2007 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1460 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...