Hi, i have this problem from time to time; the sound from the speakers does not work. When I turn the dial on the speaker, the green light turns on, but there is no sound whatsoever. I feel there is a problem with the plug - is that right?

Hi Roxanne
Sounds as though the power-supply might be faulty. As you turn up the volume more power is required from the supply and it's not delivering - hence the light fading.

you need to test the cable first sometimes when you manipul the speakers gte broke the cable , so test the cable or adaptor AC if you need

Check the easy stuff first: make sure the volume is at a reasonable level and play sounds from multiple sources like pandora, youtube, a local mp3 etc to make sure issue is consistent.

Next make sure the one or more wires are plugged into the correct ports. Or at the very least the green wire is plugged into the green plug on the computer (unless they're USB speakers?).

You could always look at the sound settings of Windows and see (if your sound card has multiple plugs) if the plugs and assigned different functions (base speaker versus microphone/headphone etc.). Hope this helps!

if you have stereo speakers, connect it to the green audio port on your computer. if you have digital surround, you have green, yellow and black. insert the speaker connectors accordingly.

diconnect all your speakers from the amp and see if the light turns green. if it does, reconnect one speaker at a time to find out what speaker is making the amp go into protect mode

oh ok. I'll chek the input again Thanks

TRY WITH GOOGLE SEARCH USING MODEL NO.

The SL2 works in such a way that the speaker satellite out put from the bass modules is fed to the input of the SL2 transmitter (remember, transmitter) then the sattellitespeakers are connected at the other end of the room to the receiver. An initial blinking green light should be seen and once the system is turned on this turns into steady green. Both the SL2 transmitter and receiver operates via WIFI.

Glad to be of service...

Hi, 1)Try replacing the power cord of the speakers. 2)Be sure the wall plug has electricity. 3)Connect to speaker into another plug just to see if the green light come alives.

I was face the same problem 2 year's ago.This problem occur when you move the speaker's here and there.at that time speaker's wire diconnected in inside...please check the whole wire by electricians for where exactly it is disconnected...