Question about PfaFF Creative 7570

2 Answers

Pfaff 360 automatic slows and stops after only minutes of use

Posted by on

  • c_me May 11, 2010

    Like a car running out of gas? How is the motor? is it making any strange noises?



    When my pfaff 2027 did that I had to replace the power cord and the foot pedal then it worked fine. also make sure the outlet its plugged into can handle it.



×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Pfaff 360's don't like to sit, they like to drink. . .. oil.
Set top knob "C" to 0
Right top (zig-zag knob) set to 4, lever below but on the same dial points straight down. Set stitch length to 4. Run 5 minutes medium speed.

After that lift off the top cover and spray inside with "Tri-flow", then run a hairdryer on it for 20 minutes to warm up or set near a warm lamp overnight. Run daily 5-10 minutes and exercise the right knob between 0 and 4 (zig-zag). It should come back to working with oil, time, and heat.

Posted on Jan 08, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My pfaff 360 is awesome, i am having a hard time getting it to zigzag. i have the owner's manual but it doesn't troubleshoot it. I acquired the machine recently so i don't know much about it. thanks.

Posted on Dec 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO YOU WIND A BOBBIN ON A PFAFF 2022 SEWING MACHINE


Bobbin winding

1. Place the thread spool on the spool pin in

????

against the spool.

????

back to front. Pull the thread clockwise around

????

????

the inside to the outside.

4. Place an empty bobbin on the bobbin spindle.

5. Push the bobbin lever to the right to wind.

A pop-up appears on the screen to inform

you that bobbin winding is on. Press the

foot control or the start/stop button to start

winding the bobbin.

When the bobbin is full, the bobbin winding

will slow down and stop automatically. The

pop-up closes. Remove the bobbin and cut the thread
????

Sep 14, 2016 | PfaFF Sewing Machines

1 Answer

PfaFF creative vision automatically restarts


Probably the transformer is bad. You should have a five year warranty on this but a dealer has to see it.
Sorry, no easy fix.

Apr 10, 2014 | PfaFF Sewing Machines

1 Answer

Condenser melted--what to do?


the machine needs to be checked at a sewing machine repair shop

Mar 13, 2012 | PfaFF Sewing Machines

1 Answer

I have a PFAFF 360 sewing machine. I can not get it out of zizzag


If you can get into the top of the machine you will probably find that the old oil has congealed,you need to try some WD40 first of all to see if that frees the cam off

Mar 07, 2010 | PfaFF Tiptronic 2040

1 Answer

Automatic bobbin winder does not stop when bobbin is full


Simply loosen the screw on the bobbin winder stop, no more than 1 full turn or you will drop the backing nut will fall down into your machine, move the bobbin winder stop slightly to the left then tighten the screw and see if that works. you may have to repeat this step several times until you find the right spot to stop the bobbin at the correct point.

Jun 27, 2009 | PfaFF Creative 7570

1 Answer

Pfaff 360


You can try; http://groups.yahoo.com/group/oldpfaffpforum/.
I did a google search on "Pfaff 360 User Manual" and found different manuals on the internet, but they want $10 and up for these. I believe someone can help you at the pfaff forum for free. Good luck to you.

Mar 30, 2008 | PfaFF Creative 7570

1 Answer

Pfaff 7570 Sewing Slow


Unfortunately, this is most likely a computer board issue and there's just no way to predict if/when a board will go bad.

Your only option at this point is to take it to an authorized Pfaff dealer. If the person who serviced it was an authorized Pfaff tech, take it back to them. If not, do take it to a Pfaff dealer - non-Pfaff authorized techs are not trained on the machines.

Sorry I can't give you a simpler answer, but until this is corrected, your machine won't work properly.

Best,
Kim

Mar 18, 2008 | PfaFF Creative 7570

Not finding what you are looking for?
Sewing Machines Logo

1,058 people viewed this question

Ask a Question

Usually answered in minutes!

Top PfaFF Sewing Machines Experts

SewTechWayne
SewTechWayne

Level 2 Expert

186 Answers

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Are you a PfaFF Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...