Question about Akai PT4298HD Rear Projection Television

1 Answer

Dead projection tv

I replaced the convergence ICs not very long ago. At the time, the symptom was that the tv was dead, but at least the red light would flash. Aftyer I replaced the convergence ICs, the tv worked for a while and now it is dead. Please advice if have solution. Petu

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 317 Answers

Replace ic's again with original part check low ohm resistors...disable one side of res. to test..john

Posted on Sep 12, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ghost image in red and alot of red color. This occurs all the time. I have tried magic focus and manuel focus. No change


The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?This tv have a dead convergence board.The tv convergence board must require replacing 2 STK convergence ICS and some or all of it resistors too.Fixing the tv convergence board,will solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 09, 2011 | Hitachi 51F500 51" Rear Projection...

1 Answer

Color distortion, hazy snowy screen with thin red lines, suddenly happened had perfect pic 24 hours ago


Tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board is dead.The tv convergence board require replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Feb 01, 2011 | Mitsubishi VS-50705 50" Rear Projection...

1 Answer

Have three different color images (red,blue,green)


It is symptom of convergence output ICs failure, replace convergence output ICs located on D board to fix this problem.
Call local tv repairman to replace defective ICs if you do not have prior experience of electronics stuff repair.
Thanks.

Dec 15, 2010 | Sony KP-51WS500 51" Rear Projection...

1 Answer

On the screen I see on the sides of every object a shadow, it,s green on the left side and red on the right side accompanied by some little horizontal red stripes. It started doing it all of a sudden a...


The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 15, 2010 | Hitachi 65TWX20B 65" Rear Projection...

1 Answer

Just a couple days ago i turned my tv on and the color images had more red then any other color


The tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look like.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts on the tv convergence board,must be replaced to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Oct 19, 2010 | Hitachi 57F500 57" Rear Projection...

4 Answers

Blue will not focus causing "shadows". Magic focus will not solve the problem.


This tv have a problems call convergence,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.These parts must be replaced to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jun 17, 2010 | Hitachi 53FDX20B 53" Rear Projection...

3 Answers

Double photo


Replace both of your STK ICs STK392-110s use 150s Mats has Them 1-800-628-1118

Jun 02, 2010 | Sony KP-46WT510 46" Rear Projection HDTV

1 Answer

Red shadow


Ur tv have a convergence problems,it dead.The tv convergence board the 2 STK convergence ICS and some or all it resistors are dead.All these parts must be change to solved convergence problems.The shop will cost U $300-350 for parts and labors.

May 26, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

JVC AV48WP30 Projection TV..Half picture distorted and flickering


Ur convergence is dead.Must replaced the 2 convergence ICS and all it resistors.The shop will cost U $300 for parts and parts.

Feb 10, 2010 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Akai PT4298HD Rear Projection Television Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2336 Answers

The Knight
The Knight

Level 3 Expert

75424 Answers

yadayada
yadayada

Level 3 Expert

79865 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...