Question about Dryers

1 Answer

Drum Not Spinning

I believe I overloaded the dryer as I heard some squeaking noises when I turned the dryer on. I immediately turned it off and took some clothes out and proceeded. An hour later I went to retrieve my clothe and they were still wet. I ran another cycle and about an hour later they were still wet. At that point I noticed how quiet the dryer was and I believe its not ''tumbling'' the way it should. Is this a belt issue? If so how difficult is it to change?

Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

Probably is a belt issue. It'll take two people to change. You'll have to take the front off to access the drum and be mindful of the belt route. Good luck.

Posted on Apr 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

There is a scratching noise when the drum turns. It's not continuous but frequently heard.


Hi,
Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you fortaking the time to educate me. " - teresa241964

Jul 17, 2011 | Maytag SDE2606 Electric Dryer

1 Answer

My GE electric dreyer, DHDSR46EGWW, is making squeaking noise and a grinding noise. My husband took is apart last night and put back together. When he started it the noises came back and he said it...


It could be the rear bearing or if not it have your honey take it apart again and inspect the rear rollers, if they turn freely then inspect the front bearing assy it is on the the door and if it looks worn down then it is allowing excessive pressure on the rest of the unit .

Apr 01, 2011 | General Electric DHDSR46EGWW Dryer

1 Answer

Drum not turning, just belt spinning around. Drum making noise


Hi,


Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker

Jan 05, 2011 | LG DLE2532W Electric Dryer

1 Answer

The dryer is squeaking (especially when it begins spinning), and it spins a little rougher than normal.


The sqeak is from one of two items surrounding the drum. It can be the belt with a bad roller on the belt tensioner or the liner surrounding the round lip of the front part of the drum to the dryers front panel.
If the squeak can be heard dy the dryers door it will be the felt liner. If deeper inside it will bet the belt
Sears has replacement parts online and at all repair centers for sale

Apr 10, 2010 | Amana NED5500TQ Electric Dryer

1 Answer

Whirlpool elec dryer, very loud and stops spinning.


The belt is probably bad and the noise is most likely the guide wheel for the drum

Jun 11, 2017 | Whirlpool Dryers

1 Answer

When we turn on our Whirlpool Supreme electric dryer, it heats up and dries clothes, but it is making a loud squeaking noise throughout the cycle...sometimes louder than others.


The squeaking noise can be caused by any of the following.

Location High:

Belt slipping on the dryer drum

Worn Drum seals but would sound more like a dragging noise

Location Low:

Belt tensioner pulley bearing frozen and the idler pulley shaft is spinning inside the belt tensioner assy.

Belt slipping on the motor bearing

Motor bearing is dry

Thanks for using FixYa!

Kelly

Mar 04, 2010 | Whirlpool LER5636P Electric Dryer

1 Answer

417.83142201 just replaced felt pads, upper and


try to lube the rollers on the back wall, where the drum mounts , sometimes the wheel bearings tend to make noise specially when dryer is overloaded and hot

Feb 05, 2010 | Kenmore 83142 Electric Dryer

1 Answer

Dryer makes loud squeaking noise when spinning


there are two possibilities for this question. 1) there is an idler roller that give the belt the correct tension . unplug dryer and remove idler roller see if it spins freely if not replace it @0 there are two drum rollers in back of machine thatdrum rides on remove drum it's self explanitory how to remove drum and very easy also. you can roll these wheels and check for free movement visually check them ,one or both should be worn out or the bearing in the wheel has failed before putting old or new wheels back sand the wheel shafts to get any gunk off them and that's about the only thing that can make a dryer squeek

Jan 25, 2009 | GE 5.8 Cu. Ft. Extra-Large Capacity...

2 Answers

Squeak in Kenmore HE 2plus front load washer when drum spins


Squeaking noises are hard to find unless u open it and pin point where its coming from.. you can open the back cover if you are comfortable doing so.. let it run to see if you can heard... sometimes the bolt holding the pulley to the drum is loose and need to be tighten. Other possible is the shocks came loose or when install new.. the shipping materials were not remove..

Dec 13, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Makes squeaking noise after running for about 10 minutes


there are 2 drum rollers at the back of the dryer. shut off power, pull drum and you will see 2 rubber wheels. there is a little plastis triangle that keeps the roller in place. try spinning the rollers . they probably will not spin too freely. remove triangles ,inspect inside of roller the stainless steel bearing may have gunk on it try to clean off . also check shaft roller rides likewise remove any debri use a little rubbing alcohol to remove gunk. also check the idler roller that routes the belt for the same things. good luck

Nov 16, 2008 | Kenmore 67082 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...