Question about KitchenAid KFP750 Food Processor

1 Answer

Disc stem stuck...can't pull it off.

Finished grating cheese and couldn't remove the stem.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hey I had the same problem. This may sound primitive and stupid but it worked. Give the stem a good whack with a wooden spoon all the way around, it will come off.

Posted on Dec 08, 2009

  • angeloioc Mar 09, 2011

    put the mixing bowl up as much as possible. spray some wd40 into the groove between the attachement and the motor shaft. Wait for several minutes, then with a hammer and a piece of wood, give the bowl a good wack. With a few goes, it will gradually come off. I will be putting some butter inside the attachement from now on to keep it lubricated

  • Donna Tallent
    Donna Tallent Jul 31, 2015

    Primitive but perfect! I've had two disc stuck on the support post for a long time and was determined to separate them. I tried soaking in hot water, WD40, then saw the wooden spoon comment and success!!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had just finished cheese and couldn't get the


If still interested in a replacement for the Ultimate Chopper - there is a website call TV Time Direct - website: http://www.tvtimedirect.com.
Their phone # is 800.238.7119. On their website, use the Quick Find option (upper right corner) - type in Ultimate Chopper and it will list the replacement listing for this item.

Oct 04, 2009 | Ultimate Chopper Food Processor

1 Answer

My disc stem is stuck and will not come out.


Without careful use and care, there is a possibility that the disc stem can become fused with the motor shaft. If excess pressure is being applied to the slicing or shredding disc, this can cause immense friction and cause the plastic disc stem to "weld" onto the motor base itself.

I would suggest calling Kitchenaid Customer Service to see what options are available.

Their toll-free number is: 1-800-541-6390.

Jun 06, 2009 | KitchenAid KFP740 Food Processor

1 Answer

Grating


Any of the disc blades require the use of the detachable stem. The official "Fine Grating Disc" (which doesn't normally come supplied with the food processor) is mainly for grating cheese, but the shredder disc that comes supplied with the food processor will do the job for you.

Here is a link to the manual:
http://www.cuisinart.com/share/man/57_man.pdf

-Tha Mp3 Doctor

Apr 25, 2009 | Cuisinart DLC-8S Pro Custom Food Processor

1 Answer

How to attach grating/shredding blades to GE Food Centre FP22


When you remove the regular chopper blade, it should fit on top of the stem. The chopper blade must be removed to use the slicer / shredder attachments.

Jan 05, 2009 | GE Food Processor

2 Answers

I am unable to remove the disc stem


There is no mechanism to lock the stem onto the base of the KFP750. It's just held on by gravity, so you're not missing anything simple!

It's possible that the soap dust got in there and glued in on. Take a blow dryer or very hot rag (use tongs!) to the stem to see if you can soften the soap, then pull up the stem.

Dec 26, 2008 | KitchenAid KFP750 Food Processor

2 Answers

The disk stem is stuck


We had the same problem! I was bending a 18" pry bar and couldn't move it! Finally I tapped the spindle LIGHTLY and it broke loose and have had no more problems. I even bought $80 worth of replacement parts and did'nt use them. The serivce center sold me the parts but the Tech refused to talk me thru installing them.

Jan 03, 2008 | KitchenAid Professional KFP770 Food...

3 Answers

Lid of food processor


i am also having the same problem. it happened as soon as i got done putting in some parmesan and grated it. never happened before and i've got a few cups of parmesan cheese just sorta wasting away inside the processor. very tempted to break the damn thing open and just buy a new processor from a different company.

Dec 01, 2007 | KitchenAid KFP670 Ultra Power Food...

Not finding what you are looking for?
KitchenAid KFP750 Food Processor Logo

Related Topics:

1,977 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Ted Maxwell

Level 3 Expert

3519 Answers

ray gallant

Level 3 Expert

41519 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...