I have a Maytag Centennial top load washer. When washing in normal or heavy with large or super load size, the washer remains in sensing mode. Some water does start to fill, but never reaches wash cycle. The lid is locked and light not blinking. Sometimes, it does work normally when selecting small load, but need it to work all modes. any idea what the problem is?

https://www.mrappliance.com/blog/2019/october/what-to-do-when-your-washing-machine-won-t-drain/

https://applianceassistant.com/Washer-Repair/Maytag-Centennial/Maytag-Centennial-Washer-Diagnostic-Tests.php

https://www.youtube.com/watch?v=yChiOXFVg9c&app=desktop

https://www.youtube.com/watch?v=oknURo2n7-E

This is a manual. Since there are so many versions, you might need to search for the appropriate one. I searched for "Maytag centennial top load washer repair manual". There was a Maytag site, but download was very slow. http://applianceassistant.com/ServiceManuals/8178628_ml-3_maytag_centennial_top-load_washer.pdf#zoom=100#scrollbar=1#toolbar=1 http://applianceassistant.com/ServiceManuals/8178628_ml-3_maytag_centennial_top-load_washer.pdf

If it is belt driven the belt might be broken. It is underneath the washer

The water is probably siphoning out of the tub. Your drain pipe is either too low or the drain hose is down too far into the pipe. Take the drain hose out of the pipe and lift it high. I'll bet your problem goes away

Hello there and welcome to fixya
Here is the specifications on this washer
and this should explain why it dosent take much water to get clothes clean
This high-efficiency Centennial Top Load Washer features the IntelliFill automatic water level sensor and 11 automatic wash cycles to give you plenty of options. Low Water Wash with EcoConserve helps you save energy, while its spacious capacity means plenty of room for your largest loads. Inside, the stainless steel wash basket resists chips, scratches, and odors, as well as maintaining a smooth surface so it won't snag or pill fabrics. You get all that and still use 70 percent less water and energy in a model that pays for itself in four years. This no-nonsense machine does what you want.

• CLICK HERE to learn more about Maytag Appliances
• 3.6 cu. ft. capacity easily handles large loads and bulky items such as comforters
• Rear panel controls provide convenient access to all cycle and option selections
• IntelliClean impeller continuously moves clothes through the water for a thorough cleaning
• 11 automatic wash cycles including heavy duty, casual, bulky and delicate to provide washing options to handle a variety of fabrics
• ENERGY STAR qualified with a CEE Tier III rating: this washer is among the most efficient washers in the industry
• Stainless steel wash basket resists chips and scratches and helps to protect fabrics from snags and pilling
• Automatic Temperature Control monitors and adjusts incoming water flow to maintain the selected temperature for more consistent cleaning results
• Low water wash with EcoConserve: use less water and get better cleaning performance through concentrated wash action, Low Water Wash technology enables the detergent to penetrate better and pre-treat soils with a concentrated mix
• The IntelliFill sensor regulates the amount of water being used, making automatic adjustments based on the size of the load and type of fabric
• MaxExtract Extended Spin option accelerates the load's final spin to remove moisture and reduce drying time
• Deep Clean option uses a additional cleaning action and a deep rinse to ensure load is clean the first time
• Click Here for details on the services included with Delivery & Basic Hook-up and Installation options for Major Appliances
• MFG Model # : MVWC400XW
• MFG Part # : MVWC400XW

We have the same problem. The Normal cycle still works, but after the final spin cycle, water is again added (1 gal est.) and the machine stops. Problem occurred after washing an old 25 x 30 inch rug which partially disentegrated when washed. We were seeing particles of the rug in subsequent wash cycles during drain into laundry tub. Don't know if something is plugged in the washer or if it is something else. In another load after the rug wash, the top of the washer was lifted during the wash cycle. The water problem occurred immediately after lifting the lid as the wash load went through remaining cycles. Maybe this affected the timer? Maytag customer service suggested unplugging power cord to re-set timer. This didn't make any difference. We need a technician to tell us if this is a timer problem or something else?

According to page 6 of the manual for the "3 cu. ft. Capacity Maytag® Centennial® Top Load Washer" and page 8 of the manual for the "Centennial® High-Efficiency Top Load Washer", not more than 1 cup (250 ml) should be used in either machine.

Also, it should be added to the dispenser cup on the front left of the machine - not directly to the wash as it will interfere with the detergents ability to clean the clothes.

I hope this helps & good luck. Please rate my reply. Thanks.

Have to keep the loads a little smaller and better balanced. Does not appear to be a particular problem with my machine.

Sounds like a hose off pressure switch or faulty switch/ however make sure drain connected ok 1st....