Question about Maytag MLE2000 Front Load Stacked Washer / Dryer
I just bought a used Maytag Stackable, washer/dryer. The problem I have when I engage the wash cycle is that it seems to start up, water fills into the machine, but it doesn't seem to wash, spin or drain completely. Can any body give me any troubleshooting ideas?
If the door lock light is on then is might be the "door lock enable spin switch" the plunger at the opposite end from the wax motor is not fully depressing the switch. In the stackable it is just behing the door lock. Remove the two middle covers (2 white phillips screws and one hex head screw on the middle of lower cover by the wires)to test place a few layers of masking tape on the end of the plunger and cycle the machine. Might also be a weak Wax motor (dark brown in color) to be safe replace both for about $12 each. Fix in 10 - 15 min.
Posted on Jun 11, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Apr 27, 2017 | Maytag Washing Machines
Feb 28, 2013 | Maytag LSE7806A Top Load Stacked...
May 19, 2010 | Maytag LSE7806A Top Load Stacked...
Nov 06, 2009 | Maytag MLE2000 Front Load Stacked Washer /...
Sep 22, 2009 | Maytag MAH6700AWW Neptune Front-Load...
Mar 31, 2009 | Maytag MLE2000 Front Load Stacked Washer /...
Mar 13, 2009 | Washing Machines
Dec 13, 2008 | Maytag Neptune MAH5500B Front Load Washer
1,103 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: