Need cd info to reinstall printer

Could be a faulty optical sensor or crud on the glass?

Try Ctrl + c (copy) then go to your word doc and Ctrl + v (paste) to paste into your document.
If this does not work then the WEB site has prevented copying this document.
You will need to print the WEB document and then type the info into your document.

Try disconnecting the printer from the USB port and reinstalling the CD program. Don't connect the printer to the USB port till the program says to do so.

Hope this help. Bud

printer is offline yet cables are connected and printer was working a day or so ago!

Windows may have eaten its baby again- that is, the driver for that printer.
Open the Control Panel, then Printers and Faxes, delete any listing for that model of printer, make sure the printer is on and connected, then reboot your system. This will force Win to 'find' the printer and install an uncorrupted driver for it.
(=Plug and Pray) 

Hmmm i think i need a bit more info... have you tried using the copy function? Check the Lcd screen for error msgs? If the copy function works and there are no error msgs then i would suggest a uninstall and then reinstall of the driver:

Use this updated driver direct from lexmark. During the install it should print a test page.

http://search.lexmark.com/printer/US/en/17K0000

If the test print does not work then try a different usb port.

Hope this helps..Good Luck please rate my response..

try a test page, first, please..computer disconnected from printer..

and go get fresh set of printer drivers here

Uninstall the drivers then reinstall them this sometimes works.

Thanks J

Better you unsinstall and then reinstall the Printer software.

You need to reinstall your printer driver. If you have the installation cd,
1. unplug your printer from the computer,
2. install the driver from the cd,
3. plug your printer back into the computer
4. turn the printer on
5. print your document.

If you do not have the installation cd, try the printer manufacturer's web site for the print driver. Before installing the driver, disconnect the printer from the pc to make sure installation goes smoothly.

Once the driver is installed, when you plug the printer into the computer and power it on, the computer will find it and finish the installation process automatically.

This will not help the problem posted by guest. His problem is totally unrelated.