Question about Sharp AR-5316 Advanced Digital Imager Copier

1 Answer

I have a Sharp AR-336 that's showing me F1-00 error code. What is this and how do I fix it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 95 Answers

F1-00 is a communication error between the copier and the finisher. It could be a loose connection (wire that connects finisher to copier) or it could be worse like a failed board. It could be the finisher board or the PCU board on the copier.
Make sure the finisher cord is firmly connected to the copier.
Make sure the copier is not plugged into the same wall outlet as another piece of equipment that might be drawing excessive power. do not plug into a cheap surge protector with other items.
If problem persists call a tech.
Hope this helps

Posted on Apr 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a H5-02 code on a Sharp AR-336


input C + interrupt + 0 + interrupt +start +14 +start

Dec 05, 2013 | Sharp AR-C160 Color Copier

1 Answer

Sharp ar 336 copier


remove the fuser unit and clean the thremister, but 1st turn machine off, upon reinstall of fuser enter service mode p*c* and choose 014 to reset the code, if that doesn't work you may need a new fuser

Nov 09, 2013 | Office Equipment & Supplies

4 Answers

How to fix Sharp Copier AR-5731 Error code


good day, my Sharp AR 5731 showing the message Call for Service . Code : H4-00 can you help me to fixed my problem. thanks and God Bless

Mar 11, 2013 | Sharp AR-BC260 Color Copier

1 Answer

Salut je cherche solution par rapport à un code Code H3-01 sharp AR 336


The problem is in your fuser section. You may have a bad thirmistor or heater lamp or the main pcb. Good Luck...

Jan 22, 2010 | Sharp AR-M237 Copier

1 Answer

E7-00


E7 00 Content ICU communication trouble (ICU
detection)
Detail Communication setup error,
framing/parity/protocol error
Cause Slave unit PWB connector improper
connection
Slave unit PWB – ICU PWB harness
trouble
Connector pin breakage of the motor
PWB of the slave unit PWB
Slave unit ROM trouble. no ROM, ROM
reverse insertion, ROM pin breakage

May 01, 2009 | Sharp AR-507 Copier

3 Answers

HAVE A SHARP AR-336 WITH A CODE H3-00 HOW DO I FIX THIS


You can try this it works for older Sharp models.
  1. Press # key
  2. Press * key
  3. Press C key
  4. Press * key
  5. your display will stop flashing H 3, if not re-enter the keys again, some machines are temparmental, when it goes blank
  6. enter 14
  7. press the start key then turn it off and back on, if it comes back with an h code there is a problem with the heat section and will need a service call and probably parts.
  8. good luck

Apr 21, 2009 | Sharp AR-M237 Copier

1 Answer

I have a Sharp AR-336 with an error code of E7-11. How do I turn this error message off?


The E7 can not be "turned off". This error usually indicates a bad laser unit or "shading" problems. You could try cleaning all the glass/mirror components including the white shading strip under the glass - it may help.
Probably need a new laser.

Mar 19, 2009 | Sharp Office Equipment & Supplies

1 Answer

Ar 336 sharp copying machine code F1-05 please help


If you have a finisher on that unit ,that code is upper limit switch problem. Check to make sure your upper tray is in the right position. Otherwise your either your tab is broken or your led is popped.

Jan 02, 2009 | Sharp AR-5316 Advanced Digital Imager...

Not finding what you are looking for?
Sharp AR-5316 Advanced Digital Imager Copier Logo

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...