Question about Roper REX3614KW Electric Dryer

1 Answer

Electric drier takes 2 to 3 cycles to dry one normal size load

Drier is a Performa by Maytag. I keep the lint trap clean every load and the loads are medium sized.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you tried cleaning the actual inside of the drier?
When you use drier sheets the wax on the sheets melts onto your clothes and makes them soft, but the wax often gets stuck in the holes of the drier making it incapable of drying the clothes in one load. Try scrubbing the inside of your drier with some hot water.

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bosch condensation dryer when on heated dry clothes come out steaming hot not dry


Sounds like something's blocking the hot damp air being removed from the drier. If you are confident enough, go through the drier vent system looking for a blockage. If not get a good DIY neighbour or appliance engineer. Silly question, is the drum turning?

Jan 05, 2015 | Bosch WTE86300US 24" Axxis Series...

1 Answer

Dryers I have a Maytag electric Dryer, that...


you may have one of ur overheat sensors going out that wont let the elements heat uplike they should they are behind the back cover they are round and very inexpensive u can take the wires off put new one in or u may have a bad element ake the wires off and check continuity thru the element itsself if all that is good take dryer vent off and run with it off 1 load and seee if this cures the problem if it does u had the hose kinked or u have a restriction of lint in the dryer vent going outside hope this helps

Feb 25, 2010 | Maytag Neptune MDE6700A Electric Dryer

1 Answer

Maytag electric dryer is drying inconsistently.


you may need to check the lint trap and clean it .. also try cleaning out the dryer vent... if this doesnt work , try changing the drine belt...

good luck

Oct 12, 2009 | Dryers

1 Answer

Maytag Legacy Series Washer. Lint settles on


Lint is in majority flushed out in drain cycle. make aire the tissue and match books aren't in any pockets. the lint is then deied and separated in the drier , Well so I was told . good luck

Jun 07, 2009 | Maytag Legacy Series Top Load Washer

1 Answer

It is taking 3 full cycles to dry my small loads on my Maytag Performa PYE2300AYW. I have cleaned lint tray and trap. I need to clean the lint from the inside of my dryer - How do I do this?


The main area that you have to clean is the pipe leading from the back of your dryer to outdoors. Pull your dryer away from the wall. Unplug it. Unfasten the vent pipe. Now look into the back of the dryer exhaust and remove any lint you see there then look into the vent pipe and remove any lint. Finally go outdoors and remove any lint you see in the pipe or the pipe grill/cover.

Jun 04, 2009 | Maytag PYE2300AY Electric Dryer

1 Answer

Dryer lint throughout thr house


lint throughtout hte home is a sign tha there is a tear / or a disconnect of the dryer vent. check your venting

Feb 15, 2009 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Dryer Lint Trap Not Catchin Lint


If you have the ability to move your dryer away from the wall and look at the hose located at the bottom of the unit. 
1. Take the house off it might be clogged 2. check for ang gaping holes in the lint screen

Jan 19, 2009 | Maytag Performa PAV3200

1 Answer

Maytag performa model#pyg2300aww takes four cycles to dry


how long is dryer vent run ? does it go up or out to the side ? Sounds like the dryer vent is clogged. A long run on your vent will also cause this problem with a small amount of lint. Try cleaning out your lint screen on the dryer vent they can get pretty caked up with lint. If you have a long dryer vent run post back the length and direction and I will get you the maximum length for your specific run. You may need a booster fan if it is excessively long or straight up as through the roof.

Dec 29, 2008 | Maytag PYE2300AY Electric Dryer

2 Answers

Dryer heats up but isn't drying properly


yes it does something is blocking your vent either its all coiled up behind the drier or something i need to ask a few questions go out side and look at where your drier vent has a hood make sure nothing is blocking it from opening it has a little round door on it ive seen some that have little plastic screens on them that gets clogged the screen is there to keep critters from building nests in the vent line then get a flash light and look over the back to see if the vents folded over mashed etc to find out if its a vent problem take your vent loose dry a load and see if it goes back to normal if all that's ok get back to me and we will clean the drier i need to know if your lint screen is on top or in door and your model #

Jan 02, 2008 | Dryers

Not finding what you are looking for?
Roper REX3614KW Electric Dryer Logo

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Sal DeAngelo

Level 3 Expert

2287 Answers

Are you a Roper Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...