Question about Dirt Devil M086365 Bagged Upright Vacuum

1 Answer

Changing the belt

I have an old dirt devil(model#5200)I think the belt might be broken but I can't get the bottom off, whats the secret?

Posted by on

  • Anonymous May 11, 2008

    I can't get the bottom off to see if the belt needs to be replaced. The vacuum sucks but won't brush.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 152 Answers

There are screws in the bottom take out then use flathead screwdriver on the side pry apart should cum off

Posted on Mar 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change belt on dirt devil ultra handy vac


Unscrew the chrome plate from the bottom to access the belt. Watch the Brit do it on YouTube How to replace dirt devil belt on handyzip

Jul 14, 2017 | Dirt Devil Vacuums

1 Answer

My Dirt Devil ultra vision will not **** from base


Your belt is probably worn or broken. You need to replace the belt if you haven't recently. You can get the belts you need here:

Dirt Devil Ultra Vision Replacement Belts

Nov 07, 2009 | Vacuums

1 Answer

Change belt on dirt devil vacuum


It largely depends on the model you have. However, you can get any Dirt Devil replacement belt here:

Dirt Devil Belts

Oct 22, 2009 | Dirt Devil Vacuums

1 Answer

Dirt Devil- Brush not rotating on its own. No suction.


drive belt. take housing apart (draw a diagram so you can put it back together) take the broken belt to a vacuum repair shop to get the same one. mine cost 7$.
15 minutes work.

Jun 14, 2009 | Dirt Devil Featherlite Bagless Vacuum...

1 Answer

I have a dirt devil featherlite bagless vacuum; model #088600. It has suction through the hose but not through the floor mode. I think there is a blockage in the hose area but cannot seem to take it apart...


there are 3 screws 2 on the left side behind the hose and 1 on the right back by the wheel.that will take the cover off.if you need to get into the bottom there is a screw on the bottom plate in the area where it looks like the belt travels.is the brush roller turning if not then your belt is probably broke.before you replace the belt clean off the motor shaft and get the old rubber off it otherwise the new belt won't last long.please leave feedback .be sure to clean your filter inside the dirt cup

May 03, 2009 | Dirt Devil Featherlite Bagless Vacuum...

1 Answer

Changing the belt


there are 4 screws on the bottom 3 around the grid and 1 towards the back of the bottom plate.lift it off, but make sure you clean the old rubber off the motor shaft or your new belt won't last

Mar 01, 2009 | Dirt Devil M086700 Vision Bagless Upright...

1 Answer

Belt replacement


on the bottom you will see 4 screws.take them out and the bottom plate will come off.before you put the new belt on look at the motor shaft.if you see old rubber on it you need to clean it off or your new belt won't last very long

Aug 22, 2008 | Dirt Devil Featherlight Bagless Upright...

2 Answers

Changing a vaccum belt


Most of the Dirt Devils, turn the vac. over, remove the bottom plate, then you can get to the belt and brush roll. If the bottom plate doesn't come off, then from the top, there will be 2 or 3 screws to remove, then the top cover comes off to reveal the belt and brush roll.

Nov 03, 2007 | Vacuums

Not finding what you are looking for?
Dirt Devil M086365 Bagged Upright Vacuum Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dirt Devil Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Tim Venetis

Level 2 Expert

259 Answers

Are you a Dirt Devil Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...