Question about Dell (E210882) Motherboard

1 Answer

I have an E210822 motherboard with no apparent markings for the 9 pin front panel connectors. Was wondering if anyone knew the configuration or has access to a manual for this board?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

Ftp://download.intel.com/support/motherboards/desktop/d865glc/BFLC_English.pdf

there you are.

hope it helps

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring scematic for a gateway gt5636e


Gateway Support > GT5636e Desktop PC > Main Support page,

http://support.gateway.com/us/en/s/PC/R/1014825R/1014825Rnv.shtml

Click on Components in the list.

Scroll down.
Under the black - Motherboards - subheading click on the blue -
4006245R - Intel (Stoughton) G965 motherboard with LPT port

In the list click on the blue - Product Views

B - Processor Core Power Connector
That is to the LEFT of the processor socket.

This is a general example of a 4-pin ATX +12 Volt power cable, and it's respective connector on the motherboard,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

Note the LOCK clip on the power cable's connector, and the matching TAB, on the motherboard connector.
When the power cable is deemed to be plugged in Tightly, and Correctly; the Lock clip will be hooked over the Tab.

The 24-pin ATX main power cable's connector, and matching motherboard connector; has this feature also.

D - CPU Fan Connector
Go straight up, from the processor socket to the edge of the motherboard, then to the Right.

Notice how the motherboard connector is Keyed, and the matching plug connector that goes to it.
Same thing for all those white 3-pin connectors, on the motherboard.

[CPU = Central Processing Unit. Another term used is Microprocessor, or simply Processor for short.
Does NOT mean Personal Computer ]

G - Floppy Disk Drive Connector
Black 34-pin connector for a Floppy Drive.
It is next to the White 24-pin ATX main power cable connector.
Right side of motherboard, towards the Top.

If I were a betting man, I would bet you aren't using it. No Floppy Disk Drive.
But I'll tell you what.........it's nice to have.
A Floppy Disk Drive doesn't take squat to run.

Need to flash the BIOS after the BIOS has been corrupted, you can use a Floppy Disk/s with the BIOS upgrade info on it.
Jus sayin'.

H - ATX Power Connector = 24-pin ATX main power cable connector.
This is a general example of a 24-pin ATX power cable, and it's respective connector on the motherboard,

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

NOTE* Color of connector does NOT matter ]

Location covered above. Right upper side of motherboard

I - Rear Chassis Fan Connector

With the huge(?) image of the motherboard on Gateway Support, and the equally sized images available on the internet; you're on your own.

Easy to find though. Small white 3-pin connector, with Rear Fan printed next to it. I'm betting to the Left, of the aluminum finned Heatsink, for the Northbridge chip. (Below processor socket)

Next to an Electrolytic Capacitor, that has a gold, and black plastic sleeve.
Used for a computer case fan in the Rear. Draws air OUT of the computer case. (Out the back)

J - PCI Express x16 Connector.
THIS, is where the graphics card goes.
A PCI Express graphics card.

OR, you can use a PCI graphics card, in one of the white PCI slots.
I would NOT. The PCI technology is NO where near, the PCI Express technology,

http://en.wikipedia.org/wiki/Pci_express


The front of your computer is the Front Panel.
L - Front Panel Audio Connector, is for the audio ports in the Front Panel.
FP_AUDIO

It is to the Left of the white PCI slots, and the header itself is Yellow in color.
Do not know the individual pinout of this Front Panel Audio header.

You have a plug connector that plugs onto it.
You can see the header is missing one pin. The missing pin is called the Key.
This shows you how to line up the plug connector to it.

If you need the individual pinout, trace the individual wires to the Front Panel audio ports.

N - HD Audio Link Connector
Plug connector goes on it also.
Location believed to be Bottom edge of motherboard, towards the Left.

O - Parallel ATA IDE Connector
Just the usual 40-pin IDE (PATA) connector.
(Actually, ONLY 39 pins )
Bottom edge of motherboard, black in color

ALL three harddrive options are SATA, so you won't be using it for your harddrive.
The optical drive you have is IDE (PATA), so this connector is where it plugs in.

Notice the cutout in the side of the connector. This is a Locating Notch.
Lines up with a Locating Lug, on the flat IDE ribbon cable, for the optical drive,



P - IEEE 1394 Connector
It's for the Firewire (1394a) ports in the Front Panel.
Plug connector goes to it.
Color is Blue, and it is in-between the white PCI slots

Q - USB 2.0 Connectors
Two of them side by side, but separated by a small Electrolytic Capacitor.
Black color for these USB headers.

They are for the Front Panel.
Location to the right of the black IEEE 1394 connector, bottom edge of motherboard.
They utilize the USB 2.0 technology.

ONLY one is marked. -> USB 2.
It has FP_USB_2, printed under it.
Front Panel USB 2.
The other one to the Left, is FP_USB_1.

EACH of those headers supports TWO USB ports.

A (Media) Card Reader has TWO cables, and uses ONE USB header.

One of those USB headers then, can be used for a Card Reader in the Front Panel.
The other USB header for Two USB ports in the Front Panel.

R - SATA Connectors
You see there are SIX.
Marking starts with SATA 0. (SATA0)

SATA 0 is for the SATA harddrive.
SATA 1 is for an optical drive (CD/DVD drive)

IF, you are using TWO optical drives, the MAIN optical drive connects to SATA1. The secondary optical drive connects to SATA2.

Make sure if you are adding a SATA optical drive, (That the computer did NOT come with), that you go into BIOS Setup; and ENABLE that SATA connector you wish to use.

HOWEVER,............the beauty of SATA is, that you can plug ANY device into ANY SATA connector; and BIOS will find the device.

Want to plug an optical drive into SATA0? No problem.
Want to plug the SATA harddrive into SATA 5?
No problem.

Just make SURE that SATA 5 is ENABLED, in BIOS Setup.

S - Front Panel Connector

Again, the front of your computer is the Front Panel.
Moving on.......
The area of contact pins on the motherboard, that the Main wires from the Front Panel connect to, is the Front Panel header.

Here you can see the individual pins, are marked by colors on the header itself.
Pin 2 is next to the Green pin, on the Bottom row to the Right.

Pin 1 is above it.
Looks confusing, because Pin 6 for the header above it, is marked right there also.

Pin 8 is marked on the bottom of the header.
Pin 9 is marked on the Top of the header, all the way to the left; except some 'crackhead' marked it upside down. (lol)

So,........pinout..........

Starting on the Top row, at the Right side; going towards the Left,
Pins 1, 3, 5, 7, and 9.

Starting on the Bottom row, at the Right side; going towards the Left.
Pins 2, 4, 6, and 8. There is NO Pin 10.

1) Pins 1 and 3 are for the HarDDrive activity LED.
(Light Emitting Diode, so I'm not going to refer to it as a light.
It is. LED states that)

Pin 1 is for the Positive ( + ) connection.
If the HDD LED is dim when the harddrive is active, switch the wires around.

2) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

3) Pin 9 is 5 Volts.
5 Volt power. That is why it is marked as +5 Volts.
Used for the factory to test with.
It is N/C. Not Connected.

4) Pins 2 and 4 are for a Power On LED.
Pin 2 is for the Positive ( + ) wire.
If the PWR LED is dim when the computer is on, switch the wires around.

5) Pins 6 and 8 are for the Power On switch.

6) Again, there is NO Pin 10.

T - Auxillary Front Panel Power On LED Connector
Right above the Front Panel header.

Freaking beats me why it would even be on there.
To iterate;

There are only 2 pins. This type of Power On LED header has 3-pins usually.
It is used for a dual color Power On LED.

Used back in the day when computers had the 'Turbo Mode' feature, and 'Normal Mode' feature.
Dual colors of dual color Power On LED was usually Green, and Yellow.
Green for Turbo Mode, Yellow for Normal Mode.

Was in reality a bunch of cr@p.
Turbo Mode was the computer actually operating in NORMAL mode, while Normal Mode was the computer was operating slower.
Just another gimmick.

{'Buy me! I'm a shinier Red bike! }

Probably why Gateway states it does Not support this feature.

U - Clear CMOS Jumper
If you do not know what this is for, LEAVE IT ALONE.
(He states politely)

V - Front Fan Connector
Yes, you guessed it. For the computer case fan in the Front, that draws air INTO the computer.
Location? Close to the round CMOS watch type battery.

X - Intrusion Switch Connector

Can't believe they are still using this cr@p.
It's so if someone opens the computer case, the power to the motherboard is turned off.

Good feature, but if the person working on the computer; doesn't know enough to unplug the computer from power FIRST, then chances are they do Not know about Anti-Static Procedures either.

Don't FOLLOW Anti-Static Procedures, you can use the motherboard for a Frisbee, or expensive paperweight.

Static shock the motherboard, is why.
Goodbye Processor (CPU), Ram Memory, motherboard, graphics card, (IF used)......and who knows what else.

DO NOT connect anything to it. Leave alone.

(If you do though, it has to be ENABLED in BIOS Setup; to use this feature)

For additional questions please post in a Comment.

Regards,
joecoolvette

Mar 17, 2013 | Gateway GT5654 Desktop PC

1 Answer

Need a wiring diagram for a rs780m03g1


http://www.ebay.com/itm/FOXCONN-RS780M03G1-8EKRS2HM0D-DDR2-HDMI-PCI-MOTHERBOARD-/250896178535

1) http://support.gateway.com/s/MOTHERBD/Shared/4006272R/4006272Rnv.shtml

2) Product Views;

http://support.gateway.com/s/MOTHERBD/Shared/4006272R/4006272Rtc.shtml


B - Processor Core Power Connector;
is the connector on the motherboard for the 4-pin ATX +12 Volt power cable.
Located close the motherboard top edge, left side. Yellowish 4-socket hole square connector.
General example of connector, and power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

2) D - CPU Fan Connector,
The Processor fan connector is white in color, 3-pin, and above the processor socket.

3) F - Main Power Connector,
The 24-pin ATX main power cable connector on the motherboard, is to the Right of the Ram Memory slots

4) N - Front Audio Connector, (Front Panel audio ports)
Red in color, 9-pin header, and is located below the white No.2 PCI slot, at the bottom of the motherboard.

5) P - System Fan Connector, (System Fan = Computer case fan)
White in color, 3-pin header, located below the No.2 PCI slot, at the bottom of the motherboard.

6) Q - IEEE 1394 Connector,
For the front panel Firewire (1394) ports.
Black in color, 9-pin header, located at the bottom right corner, of the white No.2 PCI slot

7) R - USB Connectors, ( Front Panel USB ports )
F_USB 1 through F_USB4.
Located at the bottom of the motherboard, and these four separate headers support TWO USB ports each. Yellow in color.

8) S - Front Panel Connector,
located at Bottom/Right corner of motherboard.

Pin 9 is N/C also.
Not Connected. Used for +5 Volt power for the factory.

For additional questions please post in a Comment.

Regards,
joecoolvette

Oct 27, 2012 | Gateway E-4300 PC Desktop

1 Answer

Where can I find the pin configuration for this motherboard


http://support.gateway.com/s/MOTHERBD/Shared/4006272R/4006272Rnv.shtm

Click on Product Views.
D - CPU Fan Connector (Processor Fan)
F - Main Power Connector

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

G - Floppy Disk Drive Connector
H - Parallel ATA IDE Connector
M - Clear CMOS Jumper
N - Front Audio Connector (Audio ports in Front Panel)
O - S/PDIF Connector
P - System Fan Connector (Computer Case Fan)
Q - IEEE 1394 Connector (Firewire ports in Front Panel)
R - USB Connectors (Front Panel)

S - Front Panel Connector
The front of your computer is the Front Panel.

The area of contact pins on the motherboard, that the main wires go to, is the Front Panel header.
The above is the pinout for the Front Panel header.

T - SATA Connectors
A SATA data connector on the motherboard has 7 contact pins.
Between it, and the SATA power cable, the SATA data cable's connector is shorter in width,

http://en.wikipedia.org/wiki/File:SATA_ports.jpg

Note the L shaped slot in the SATA data cable's connector, at top;
and the corresponding L-shaped locating lug on the motherboard connector, shown at bottom.

SATA power cable general example,

http://www.playtool.com/pages/psuconnectors/connectors.html#sata

The SATA power cable's connector has a Lock tab on top. Squeezed down with the thumb tip to release when removing.

Looking at the 6 SATA connectors on the motherboard, you will note they are marked in-between the connectors, and at the outside edge of the motherboard. SATA_1, SATA_3, SATA_5, SATA_2, etc.

If using more than 1 harddrive, the harddrive that has the Operating System, is generally plugged into SATA_1.

The beauty of SATA is however, that you can plug whatever SATA device you want, into whatever SATA connector on the motherboard, and BIOS will find the device.

Mean, for one,that you can plug the harddrive with the O/S into SATA_3, or SATA_6, or SATA_4, etc; and BIOS will still find it.

http://www.ascendtech.us/acer-rs780-mb-saq09-004-motherboard_i_mb64ambsaq09004.aspx

Scroll down to the photo under the Specifications chart. It's a Top View.
The power cable, and corresponding connector on the motherboard that is Not stated on Gateway Support, is a 4-pin ATX +12 Volt power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4

Motherboard in the Top view is shown as it is, when installed in a computer case. Go above the top of the Processor socket to the edge of the motherboard, then over to the left.

Whitish square 4-socket hole connector.
4-pin ATX +12 Volt.

Above the top right corner of the Processor socket, and between the edge of the motherboard is the CPU_FAN connector.

Front Panel header bottom/right corner of motherboard

The four Yellow USB headers are to the left of the Front Panel header.

The Black Firewire (IEEE 1394) header is to the left of the USB headers.

The SYSTEM_FAN white connector is to the left of the Firewire connector.

SPDIF_OUT connector to the left of the System Fan connector.

F_AUDIO red connector to the left of the SPDIF connector

To the right of the Blue and Yellow ram memory slots, is the 24-pin ATX main power cable connector. To the right of it is the Black 34-pin Floppy Drive connector.

Below the Floppy Drive connector is the Blue 40-pin IDE connector.

Driver downloads,

http://support.gateway.com/support/drivers/search.asp?st=pn&param=4006272R

For additional questions please post in a Comment.
Regards,
joecoolvette

Aug 31, 2012 | Acer MB.SAQ09.004 FOXCONN BENGAL RS780...

2 Answers

How can i setteled the front panal usb pin connect on the usb panal on motherboard gigabyte845 gvm-rz


There are 2 USB Ports for the Front Panel USB ie F_USB1 / F_USB2 beside the "PWR_LED". You can use either F_USB ports. Just plug in the USB cable pin accordingly in the Configuration below. Be sure the the negative & positve pins are correctly plug in or it might caused damage to you Mainboard. (Pins 9 &10 not used). For further reference you can download the manual @ Link

Pin No.- Configuration
1-Power 2-Power
3-USBDx- 4-USBDy-
5-USBDx+ 6-USBDy+
7-GND 8-GND
9-No pin 10-NC

Hope it helps.

Aug 06, 2011 | Gigabyte 8IG1000MK Motherboard

1 Answer

HOW TO CONNECT FRONT AUDIO PINS


the connector is marked F_audio and it is located directly behind the rear facing audio jacks. should be only one plug either marked "hd audio" OR "ac97 audio". some cases are setup for either, but you only need one of them depending on what your motherboard supports.

11) F_AUDIO (Front Audio Connector)
This connector supports either HD (High Definition) or AC97 front panel audio module. If you wish
to use the front audio function, connect the front panel audio module to this connector. Check the pin
assignments carefully while you connect the front panel audio module. Incorrect connection
between the module and connector will make the audio device unable to work or even damage it.
For optional front panel audio module, please contact your chassis manufacturer.
By default, the audio driver is configured to support HD Audio. To connect an AC97 front panel
audio module to this connector, please refer to the instructions on page 72 about the software
settings.
Pin No. Definition
1 MIC
2 GND
3 MIC Power
4 NC
5 Line Out (R)
6 NC
7 NC
8 No Pin
9 Line Out (L)
10 NC
AC'97 Audio:
Pin No. Definition
1 MIC2_L
2 GND
3 MIC2_R
4 -ACZ_DET
5 LINE2_R
6 FSENSE1
7 FAUDIO_JD
8 No Pin
9 LINE2_L
10 FSENSE2

Mar 27, 2010 | Gigabyte GA-945GM-S2 (0818313003065)...

2 Answers

Which connectors are used for front panel, power on (red @white) and led ( blue @ white) please show a close-up view


Hi,
On the motherboard the pinouts on the front panel should be colour coded, and marked with letters like in this picture >>>>>
ce10baf.jpg

The connectors are also marked corresponding to where the connect on the motherboard, like in this picture >>>>>>
66ce2fc.jpg

If the board is not colour coded then the motherboard will marked with the same letters, you may need a strong light to see the marks.

Regards.

Feb 22, 2010 | Gateway GT5428 PC Desktop

1 Answer

Motherboard Pinout - Please Help


here are some sites that may help you.
all these should be marked power switch may say pw,prs,ps, power led may say pld, pl,led, hhd say hd, reset switch maysay rs, set, these connection will be grouped together, and pin layout 1 red or hot wire, or the main wire for the device you are trying to operate.
www.motherboards.org
www.tomshardware.com
www.twinight.org/chipdir/
www.anandtech.com

the connections to the back plate is standard the amount of pins match up the cable, the number 1 pin will be marked some how and or the cable will only be able to plug in one way.
with an exception if you are using serial connector and we hardly use them. the rules are the same as above, and plug ins maybe one way also.

the ribbon type will have a marking on the cable or ribbin line or dots or hasshs marks that is pin #1
match with pin out on motherboard pin1 or pin 0,

rod

Feb 11, 2009 | Syntax SVM266A (SYSVM266A) Motherboard

1 Answer

Connecting front panel wiring to INTEL 845GRG Motherboard


Hello davideiker1, the Intel D845GRG MB manual is shared with another Intel board. (D845GBV MB). Go to this Intel site & download the D845GRG manual; http://support.intel.com/support/motherboards/desktop/d845grg/sb/cs-008873.htm You'll need Adobe reader to view the manual. Download Adobe from this link; http://www.adobe.com/products/reader/
See page 9 for motherboard layout.
The front panel connectors are shown on page 68, see item C.
On page 69 is, Table 31 shows the pin assignments for the front panel header. Front Panel Header (J9G1).
Pin 1 is power for the hard disk drive led, pin-3 is negative for the hard disk drive. Wire colors coming from the case are important. Look at all of the front case wires. The common color for each 2-pin connector will be ground. In most cases the ground wire is white, except for the internal speaker. Ground for the speaker is normally black. (This motherboards speaker is built into the MB, no hook up is needed).
Pin number 2 is positive for the case power led which lights up as green. Pin 4 is negative for the power led.
The reset switch is a bit different. Pin 5 is negative & pin 9 is positive, however if your case uses a two pin connector than connect pin 7 as ground & pin 9 for positive. The On/Off switch, pin 6 is positive & pin 8 is negative.
If this manual is not what you see on the MB, please advise.

Good luck davideiker1!
Need more information/questions post here.
Thank you for using FixYa.
Input, comments are welcomed.
Mike

Jan 22, 2009 | EliteGroup P6SET-ML Motherboard

1 Answer

Front Panel wireing Dia for 8328E required


1 VCC 2 VCC
3 USB0 4 USB1
5 USB0+ 6 USB1+
7 GND 8 GND
9 Key(no pin) 10 USBOC

6c4a4cb.jpg

Jan 30, 2008 | Matsonic 8328E (MS8328E) Motherboard

Not finding what you are looking for?
Dell (E210882) Motherboard Logo

2,583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...