Question about Clarke Air Tools & Compressors

1 Answer

Type of oil to use

I have a clarke champ ac2110a compressor that is out of oil due to a leak. Where can I get parts online or where ever. And what kind and how much oil do I need to refill it?? Thanks!!!

Posted by on

  • Rick Emery Apr 13, 2009

    I might need a rebuild kit-It ran out of oil and locked up-I have it broke free and it works, but for how long?? Who knows??? I might need a crankshaft bearing, and gasket kit. Who sells parts??



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 50 Answers

Which parts do you need, usually compressor oil can be found at any hardware store, less that 1 quart

Posted on Apr 13, 2009

  •  Kenneth
    Kenneth Apr 13, 2009

    i don't think you'll be able to find a kit, you can match the bearings up at a machine shop. everything else will have to be custom made.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

HDC 2HP 5 Gal Pancake Air Compressor - replaced pressure switch - now takes long time to pump tire - motor runs long time - slow recovery - actually overheated and melted off the plastic part on muffler....

Your compressor takes standard 30 weight compressor oil or 30 weight motor oil... you need to put in the correct amount. The slow recovery is due to a leak somewhere. after adding the proper amount of oil, run the compressor and use a soapy solution to check for leaks. Check especially the tube that runs from the compressor head to the tank, and also check the air connection at the pressure switch. When you find the leak, you can disconnect the connection and use Teflon tape on the male end connector.

Aug 15, 2013 | Air Tools & Compressors

1 Answer


You didn't state your model number but the only place I could find that has manuals for Clark air compressors is Clark Power Porducts UK at: Usually if you have an air leak at the pressure switch when the tank is full and after the motor shuts off it is indicative of a stuck or broken tank check valve. Sometimes they can be cleaned and will work for a while but more often than not they have to be replaced.

Sep 06, 2012 | Clarke Air Tools & Compressors

1 Answer

Where do I get a cylinder head for a clarke champ air compressor model #AC2001B?

This company in liquidation in the US, however many of the same compressors are available in the UK re-branded with different model numbers/names (alpha name instead). Go down the list opening manuals until you find similar looking parts. You may find same pump/motor components on a different tank, however use manual information as needed. China made compressor as yours will be sold by many different retailers under different names. Look on ebay first "searching pancake" compressor for likeness. The manuals listed below should clue you in. Good luck.

Sep 19, 2011 | Clarke Power Products Inc AC2001 2HP 4...

1 Answer

I need a replacement part for my Clarke Champ AC2001B. Where do I look?

Try this PDF link.

If you need more help come back.Post / thumbs / testimonial are welcome!

Nov 11, 2010 | Clarke Power Products Inc AC2001 2HP 4...

1 Answer

Type of oil used in ac2001 air compressor

It should take any standard compressor oil, available and Home Depot, Lowe's, Sears, and auto parts stores

Jul 11, 2009 | Clarke Power Products Inc AC2001 2HP 4...

1 Answer

Oil covering pancake and pressure adjustments

Typically on the inside cover of the electical box it will illustrate the cut-in/cut-out controls. There should also be a fill port above the pump end of the compressor. Do you have a sight glass on the side of the compressor *(around the area of the leaking oil) usually if its coming out its due to overfilling or tipping over of the compressor.

Feb 02, 2009 | Clarke Power Products Inc AC2001 2HP 4...

1 Answer

Oil dipstick and red twist knob on top of the two pressure gauges

the big red knob adjusts working pressure to hose- refer to book or dowload online

Dec 08, 2008 | Clarke Power Products AC2002A 2 Hp Air...

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarke Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Brad Brown

Level 3 Expert

17326 Answers

Are you a Clarke Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides