Question about KitchenAid Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender

1 Answer

Kitchenaid Blender Classic

We were using our machine to make smoothies with the kids and it simply stopped running.
The lights still come on but are flashing and the machine simply makes no sound but the clicking noise from the buttons.
Is there a reset button? Or do you know what the problem might be?

Posted by on

  • Johnstan May 17, 2009

    We were using our machine to make smoothies with the kids and it simply stopped running.

    The lights still come on but are flashing and the machine simply makes no sound but the clicking noise from the buttons.

    Is there a reset button? Or do you know what the problem might be?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same thing happened to me. Opened it up and along the red wire to the motor is a bass fuse. Went to the hardware store and then I replaced it. Works fine.

Posted on May 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why wont my dishwasher go through the proper cycles


Blenders are not to be used for washing dishes, that may be where your problems are.

Jun 10, 2012 | KitchenAid Kitchen Aid Kitchenaid 5-speed...

1 Answer

I was using my blender and stopped to add more ice for a smoothy mix, but when I tried to start it up again the lights began flashing at random but the blender would not work. Why?


It sounds like it may have overheated. Firstly, Switch it off and let it cool down for a few hours. Quite often it will burst back into life. If not, you will probably need a new control board. These come in several variations:
9708845 Silver 110v 9709339 Black 110v W10291857 Silver 240v

Mar 25, 2011 | KitchenAid KSB560 5 Speed Blender

1 Answer

Blender now only has one speed and it's overspeed. Is there an overspeed govenor that causes the blender to automatically shut off? It will overspeed about 3 seconds before it stops working and all the...


there is a voltage regulator inside the circuit board , this might have got wet some how . this circuit controls 1-10 speed from a touch of a button . will have to disassemble unit , Auth personal should check this , unless you know electronics

Mar 19, 2010 | KitchenAid KSB3 Classic Work Top Blender

1 Answer

Cuisinart Quick Prep is not working properly


I think the ice was too hard for a hand blender. I think the impact has caused the blade to separate from the shaft or caused the shaft to separate internally. If your blender is still under warranty you might be able to get it fixed. Note: none of the "Smoothy" recipes in the manual call for ice. One uses ice-cream. One uses "partially thawed frozen strawberries" and one uses sherbet.

Oct 11, 2009 | Cuisinart CSB-33 Quick Prep Handheld...

2 Answers

Blender died ...... motor won't turn on


Have you tried the fuse first....

If it is the motor (quite rare), these people may be able to order you one:
http://kitchenaidblenders.co.uk/Home/tabid/36/c/KitchenAid-Blender-Spares/CategoryID/6/Default.aspx

Aug 10, 2009 | KitchenAid KSB3 Classic Work Top Blender

1 Answer

Blinking lights on KitchenAid blender


Alternating blinking lights on a Kitchenaid blender indicate a bad circuit board which is unable to run the motor properly. Unplug the blender, take the jar off, and turn the spindle by hand. Then plug it back in. If it does not work properly, try a different outlet (perhaps not in the kitchen). If nothing works, the blender needs to be repaired.

Aug 27, 2007 | KitchenAid KSB3 Classic Work Top Blender

1 Answer

KitchenAid 5 speed blender


Are you saying there's something wrong with the blender and it runs on high when it should be running on stir?

Aug 28, 2006 | KitchenAid KSB5 Ultra Power Work Top...

Not finding what you are looking for?
KitchenAid Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender Logo

1,232 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Blenders Experts

Appliance engineer

Level 2 Expert

87 Answers

eyecam

Level 2 Expert

94 Answers

Cindy Wells

Level 3 Expert

5128 Answers

Are you a KitchenAid Blender Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...