Question about Washing Machines

1 Answer

I have an atlantis serial # 16100596av the washer shakes and vibrates sometimes excessively on the rinse as well as the spin cycle. i hope this is an aesy solution!!

I have an atlantis serial # 16100596av the washer shakes and vibrates sometimes excessively on the rinse as well as the spin cycle. i hope this is an aesy solution!!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Check the Vibration damper rods to be sure that...
1. They are there and mount is solid.
2. If they are broken in 1/2.
3. The plastic knuckle mounts are not missing/broken.
4. There is oil in the shock absorber/spring section of the rods.

Also - there are suspension springs on the bottom of the tub that could be broken and/or missing.

Replace/repair as necessary.

IF THIS IS A BRAND NEW INSTALLATION - be sure you have removed the basket shipping pins (4) that secure the tub during shipping.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 17, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer shakes and vibrates very loud when on spin and rinse cycles. Washer is level, the inside baskest has lots of play in it. Could that cause this problem


you can pick up the drum to set it back in place .sometimes that will shake your washer. be sure to not over load or unbalance the washer. hope this works 4 ya

Sep 18, 2011 | Washing Machines

1 Answer

Not draining after rinse cycle


replace the timer it has a bad spot inside of it in this segment of the timer and isn't passing voltage for spin,when you forward it then it gets power again,they do wear out too

May 14, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Shreiking spin in rinse cycle


Your pump is probably what's causing the noise . Usually the bearing starting to go out , causing the pump to freeze up , begins with this noise .

Oct 11, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag Atlantis MAV6250AWW won't rinse or spin?


clean motor rollers(belt may be slipping)






















9vopy...paste)

Aug 31, 2009 | Maytag Atlantis MAV7260B Top Load Washer

1 Answer

No rinse or spin cycle


hello
you have to change the lid switch
as soos as possoble
bye

Mar 08, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Washer is shaking violently when it is time for the spin cycle


Hi you must make sure its level in all directions. ie front to back and side to side. Alos dont overload it. If its on a wooden floor it will vibrate. A concrete floor is the best

Feb 15, 2009 | Washing Machines

2 Answers

Washer drum shakes excessively during fast spin


y shaped piece that contains the spindle that attatches to the basket and allows it to spin is corroded and cracking. you can't buy just the spindle bracket, you must buy the basket too. you'll be buying the front part of the drum too, if you wait to long.

Feb 10, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Excessive vibrations


I have ordered KE shake away pads. I'll have to see how they work.

Jul 01, 2008 | GE Washing Machines

2 Answers

Excessive vibration during spin cycle


sure..start by re leveling the unit, with a standard carpenters level.

Mar 02, 2008 | Maytag Atlantis MAV5000

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Brad Brown

Level 3 Expert

15441 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...