Question about Computers & Internet

1 Answer

Change modarate to open

How do configure your router from modarate to open

Posted by on

  • Jessy Denson May 11, 2010

    What type of router,operating system, other software are you using?? Please respond Fehdi

  • Dick
    Dick May 11, 2010

    Follow the directions in your router's instruction manual. Every router is different.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 37 Answers

Which router? there's so many of them. normally oyu have to log into your router and set the device up that way. this can be achieved by going to the "Gateway" in your webpage address and with the proper credientials logging in with the administrator information. HINT - sometimes on some routers you can hit the reset switch and it clears everything out of it and then you can log in as the fefault admin account (some makes/models web address 192.168.1.1 user admin password admin) Hope this helps, without more information about the device tho it's kind of a stab in the dark :)

Posted on Aug 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i set a password


Router's password could mean 2 things. First password for you to open router's configuration page or password for you to connect wireless to your router.

Configuration's password:
-Logon to your router configuration page
-Please to the TOOLS and ADMIN Tab. You there you can change the admin user name and password. If you do not have the user name and password, please check for the default user name and password on the router's manual. If default user name and password won't work reset the router. Press and hold down the reset button or pinhole on the back of the router for 10 seconds. Then re-enter user name and password again. It should work this time.

Wireless Security Password:

-Logon to your router configuration page
-Under SETUP and Wireless Settings tab you will get an option to change the wireless password

May 21, 2011 | D-Link DIR-615 Wireless Router

2 Answers

To change password


Hi,

Open new internet explorer tab and type

http://192.168.1.1/ (If it doesn' ask for username and password try below address)
http://www.routerlogin.net

Ckeck if it asks for username and password

If ask give

username : admin
password : password

Now will be navigated to router configuration area

Now our next job is to navigate to wireless settings ( left side)

security option click on wpa/wpa2


now on passphrase enter new password

click on save button to save the settings

That'a all

Note: all devices that is connected to router via wireless will loose the connection . Now you have reconnect it using the new password

Thanks

Vote me if you are satisfied with my answer







Mar 22, 2011 | NetGear WGR614 Wireless Router

1 Answer

Nat settings on ps3 on modarate all the time can i change this


All of our clan members have the same message. It's a way for them to explain the lag that we experience. They want you to think that the lag is a user problem versus a Treyarch server problem.

Jan 18, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

I cannot locate the CD to set up my wireless router on my new computer.


Provided you did not change your router's IP address then you can still access its configuration even without the installation CD. In order to access its configuration you need to do the following:

  • Open Internet Explorer or Firefox
  • Type in 192.168.0.1 into the address bar
  • Enter the password at the prompt, if you haven't changed it the default is admin (I highly recommend changing it if you haven't)
  • You now have access to your router's configuration
If you're trying to hook the new PC into the router it's a different process:

  • Open the start menu
  • Click on the Control Panel option
  • Select the Network and Sharing Center icon and click on it
  • Click on the option to Set up a new connection or network
  • Windows will guide you through the rest of the process from there

Jan 18, 2011 | Linksys Wireless-G Broadband Router

1 Answer

How to change the settings


To install your wireless router connect a LAN cable from the router to the computer's LAN port.
Open a browser and type the Netgear configuration URL
http://192.168.0.1
The default login = admin
The default PW = password
You can now configure/change the wireless settings etc.
To configure the wireless settings and to protect your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Dec 05, 2010 | NetGear WGR614 Router

2 Answers

I want to change my nat type


You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.
Router set up page is the page where you can change the settings of the router
Click Here to know more about router and network

Apr 19, 2010 | Linksys WRT160N Wireless Router

1 Answer

Can't chang NAT type from strict to open


Read User Manual to be sure that user/pass and default ip address for your router correct. And check if your computer received valid ip from Router. Usual check: 1. Restart computer. 2. Set IP address to automatic. 3. Start > Run.. > cmd.exe > ipconfig find IPaddress and Gateway. is it 192.168.1.x ? 4. ping -t <gateway>
If there are reponses, you good to go for the router configuration.

Apr 19, 2010 | NetGear WGR614 Wireless Router

2 Answers

How do my router configure


open your browser. in the address line type in 192.168.0.1
username = admin
password = system

You should be able to make configuration changes there

Jan 14, 2009 | Cisco IOS

3 Answers

Configuring DLink Wifi router for Reliance broadband


quick questions

1. how did you setup your modem?..is it via PPPoA or PPPoE
2. can you please provide the model number of your modem

thanks


Apr 24, 2008 | Linksys Wireless-G Broadband Router

2 Answers

Macintoshes and the RP614 Router Gateway


You need a Macintosh computer running MacOS 8.6, 9.x, or 10.x. (Netgear products are not supported for versions of MacOS before 8.6.) You can use the RP614 with an eMac, iBook, iMac, PowerBook, PowerMac, or PowerPC as long as they are running one of these versions of MacOS. You also need a few Ethernet cables to make the connections between the router to your modem for internet connection and from the router to your computers or peripherals. Topic 2. How do I prevent my Network configuration from being lost when I restart my computer? When making configuration changes for MacOS it is best to use Configurations (MacOS 8.x or 9. x) or Network Location (MacOS 10. x) settings instead of just changing settings for each category (TCP/IP, AppleTalk, AirPort, etc.). If you just make changes to your settings, they may be lost when you restart your computer unless you have saved them in a Configuration or Network Location. To create a Configuration in MacOS 8.x or 9.x: 1. Open AppleTalk (or TCP/IP) from the Apple Menu in the upper left-hand corner of the screen. 2. From the pull-down File menu select the Configurations option. 3. Choose New Configuration. 4. Type in a name for your new configuration (Netgear Router). 5. Make your changes to the AppleTalk (or TCP/IP) settings. 6. When you close AppleTalk (or TCP/IP) choose Save Changes. Whenever you make Configuration changes for settings in MacOS 8.x or 9.x, open Configurations from the File menu or by pressing Command-K. Saving your changes in Configurations means that they will not be lost when you reboot your computer. To create a Network Location in MacOS 10.x: 1. Open the Apple Menu by clicking on the Apple icon in the upper left-hand corner of the screen. 2. Select System Preferences. The System Preferences window displays. 3. From the System Preferences window click Network under Internet & Network. The Network settings window displays. 4. Click the Lock icon (if necessary) in the lower left-hand corner of the window to unlock the Network window so you can make changes. (You may be asked to type in your User Name and Password.) 5. Click the pull-down menu next to Location at the top of the Network window. 6. Select the New Location option. 7. Type in a name for your new Location and click OK. 8. Make your changes to the TCP/IP, AppleTalk, and AirPort settings. 9. Click the Lock icon in the lower left-hand corner to prevent further changes. The Apply configuration changes? Window displays. 10. Click Apply to apply the configuration changes for the newly-created Location. 11. Close the Network window. Topic 3. How do I connect a Macintosh to the RP614 Router Gateway? MacOS 8.6, 9.x, and 10.x 1. Set up your system for installation. 2. First make sure your ISP connection is working. Try testing your computer with the ISP directly to make sure you can successfully make a connection to the internet. 3. Connect your DSL or cable modem to the Netgear Router. 4. Log on as Administrator (if required for your system to make configuration changes). 5. Quit all other applications. It's best when configuring MacOS 8.6 and 9.x to use the Configurations settings for AppleTalk and TCP/IP because they should then retain their settings when you reboot. (Use Network Locations to save your settings changes in Mac OS 10.x.) If you just change the settings but don't use a Configuration or Network Location to save your settings changes, you may lose those changes when you restart your computer.

Feb 19, 2006 | NetGear RP614 Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...