Question about Washing Machines

1 Answer

My whirlpool ultimate care 2 washer smelled like burning rubber during the spin cycle and did not wring out the clothes

During the spin cycle I smelled burning (maybe rubber) and the clothes did not wring out.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your drive belt/coupling has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 17, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

MACHINE STOPPED - BURNING SMELL COMING FROM WASHER


The burning smell is from your coupling and when this breaks the rubber spins across the plastic face of the opposite coupling. Your washer will not wash or spin until this is replaced. fortunately these are cheap and easy to replace. Refer to my step by step instructions to replace yours.
Here is the guide:
http://www.fixya.com/support/r4355933-washing_machine_repair_direct_drive

Mar 24, 2010 | Washing Machines

1 Answer

Whirlpool Ultimate Care II LSQ8243HQ0 weak spin, wet clothes


if it has a belt, it may be slipping, but you would smell a bit of burning rubber.in high use times(4 to 8 pm), the current of electric supply is low, thus less power. third, motor may need to be replaced. plz rate-bozcro

Sep 10, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

On delicate cycle clothes wringing wet when done


check drain hose kink or belt adjustment...worn clutch...basket drive

Aug 13, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate Care II washer went dead during fill cycle


Start with the capacitor. It has a funny smell when they go bad. The motor will smell bad as well when it burns up.

May 10, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

The spin cycle for my


Dear shelldon39, Fri 2-20-2009 9:24pm EST (USA)

Some machines will shut down during the spin cycle as a precaution to prevent damage!

They will do this if you overload the washer with clothes and/or use too much detergent!

If this doesn't help please get back to me with more details!

jack
1131431.jpg

Feb 21, 2009 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Excess water in clothes after spin cycle


Unblock the outflow pipe from the machine that goes into the sump under the sink. (have a pot ready for water overflow) This will help drain the water. If the spin cycle is making a screetching sort of noise then it is possible that the carbon brushes will need changing. This affects the spinning if the brushes are worn.

Nov 05, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Whirlpool Ultimate care 2 (ABOUT 4 YEARS OLD)


Sounds like the clutch is slipping but sometime catching. Or maybe the transmission is almost gone. Is there a burning smell? If so, probably clutch.

Apr 14, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Brad Brown

Level 3 Expert

15937 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...