Question about Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

1 Answer

No vaccum at the hose attachment, the main powerhead has vaccum

My dyson animal 07 does not have vaccum present at the hose attachment

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 83 Answers

You may have a blockage somewhere. Take the U-Bend (next to the right-hand wheel if you stand behind the vacuum cleaner) off. It is attached to the vacuum with a rectangular-shaped clip - it's purple. It is the pipe that is attached under the long gray hose. After that take out the AI Valve (the pipe above the right-hand side wheel) that has two purple buttons to remove it. Take the wand off and look through it - you should see light coming through the other end even though the wand is not straight all the way. If you can't see light through the other end the blockage is in the wand. Stretch the hose out and make sure there are no dark spots inside - those would be blockages. If all else fails call the Dyson helpline, they'll help you.

Posted on Jul 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace hose on dyson animal


Reales the hose and extend the wand buuton on the top releases it from the pole

bottom of unit where the cup sits there is a clip press that
\
Replacement Dyson DC25 Hose complete DY 915677 07

Apr 24, 2015 | Dyson Bagless Upright Vacuum DC25 Animal

1 Answer

How do i replace a hose on a


Most hoses simply pull off, and the new one pushed back on in its place. As far as I am aware replacement hoses come with the correct connections ect so the main hose should have the plastic handle part and also the bottom couplingfor near the base of the vaccume

Aug 17, 2014 | Dyson DC33 Animal Bagless Upright Vacuum

1 Answer

Dyson 07 wand cap removal


http://www.dyson.com/support/dc17/dc17-animal/diagnosis-root-menu/dc17filterwashvid/flo-dc17-wand-suction/flo-dc17-remove-the-wand-from-hose - This should help you!

Aug 05, 2014 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Beater brush does not work. Brush is clean and belt is not broke. Dyson 07 animal vaccum


Even though the belt may not be broken it might be stretched and if that is the case it will not turn the brush. You can get replacement belts here:

Dyson DC07 Replacement Belts

Nov 16, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Can't use hose attachments because no suction


chech the hose for a blockage this would cause the hose to compress as you describe

Jul 23, 2009 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

Dyson Animal hose collapses when using attachment hose


You have a clog in either your hose or your wand. You need to take off the wand and hose and inspect them.

Nov 15, 2008 | Dyson DC07 Animal Bagless Upright Cyclonic...

1 Answer

The extension arm of my Dyson Animal no longer has any suction. I can attach it but it has extremely limited power to reach high places or under furniture. Also, when I stand the unit, used as vacuum,...


you have a blockage within the wand or at the u-bend at bottom of the hose....try removing wand and see if u hav esuction at end of hose...if so wand is blocked,if not removed u-bend

Oct 07, 2008 | Dyson DC17 Animal Bagless Upright Cyclonic...

1 Answer

No suction


so the red hose isn't connected to a part on the vaccum so like it is connected to the connester but not to an opening just above the beater bar, this is the only idea i can supply you with. good luck, maybe i got lucky and helped you out.

Jun 12, 2008 | Dyson DC17 Animal Bagless Upright Cyclonic...

Not finding what you are looking for?
Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Nick Olsen

Level 2 Expert

183 Answers

Are you a Dyson Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...