Question about Hitachi 50UX26B/27K 50" Rear Projection Television

1 Answer

Fuzzy Picture My set has started to give me a fuzzy picture, almost like it is out of focus. I ran a auto focus but the problem still exists. It soed not seem as bad when I use the dvd player. Anyone have a link to the manual for thisset? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 927 Answers
Re: Fuzzy Picture

Good Day, larrys;

Hope you fixed TV by now but if not, try this; order KIT 10 from B&D ENTERPRISES, 1-800-458-6053.
Your problem is in the TV's convergence circuit. The KIT will tell what to do.

Good Luck, big IRISH.

Posted on Aug 16, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When I turn on the TV, the picture is fuzzy. After five minutes, the picture is clear but any words are out of focus even the menu for adjustments is out of focus. The convergence for red is clear but...


Below are some troubleshooting tips for a TV that has a fuzzy or blurry picture;

If your Plasma or LCD TV picture is blurry or fuzzy there are several things that may be causing the problem. It's worth running through the following list before seeking service. You may find yourself saving the full cost of a TV repair.

Make sure you are using the appropriate cable box for your TV. If you have a high-definition TV you should also be using a high-def channel box from your cable provider. Watching standard definition channels on a high-def TV can make the picture look distorted and fuzzy.

Not all cable channels are broadcast in high-definition. When you stretch a standard definition picture to fill the full frame of your wide-screen TV it may look distorted. You can try changing your TV display settings to show standard-def channels at their native resolution. This will create black or gray bands on either side of your picture.

Ideally all of your video components will be connected to your TV with HDMI cables. Your next best option will be component video cables. If your cable box does not have HDMI capabilities, contact your cable company about upgrading your box to one that does include HDMI.

Make sure there is no glare on your TV from a window or other strong light source. This can significantly degrade the quality of the image you are watching.

If your TV has digital noise reduction, try turning that feature on.

You can adjust your TV's sharpness and picture modes to see if that improves picture quality.

Try plugging the power cord into a different electrical outlet and/or surge protector. You may be receiving electrical interference through your power cord.

Trying moving any nearby electrical devices away from the TV. They may be creating interference that can degrade the picture quality.

Let me know if the above helps or not, so that I can direct you further on what do next.....

Best regards.

Apr 14, 2011 | Zenith IQB50M90W 50" Rear Projection...

1 Answer

Picture is unclear color are off

there are a few things you might be able to do. First I would try the auto focus or alignment feature of the set. there should be a option in menu to realign the lamps.

May 24, 2010 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Hitachi sp-46w - picture is fuzzy, ran magic focus and stops 1/2 way in the green. A code appears at the bottom right "5" any clue?

Ur convergence,it dead,need it replaced,Know how to solder?Buy a convergence kit,tries Tv repair,Tv repair kits.

Nov 24, 2009 | Hitachi 46F500 46" Rear Projection...

1 Answer

Toshiba TV Model 42H81 will not focus

Ur convergence it dead.Buy the kit and replace the ICS an the resister.Focus don't go that far.

Aug 11, 2009 | Toshiba 42H81 42" Rear Projection...

1 Answer

Poor pictre quality

This set has 3 CRT's (picture tubes)
Remove the back bottom cover
Clean the CRT's with windex and a soft cloth.
(Find the Screen/Focus block)----Remove front grill cover and panel which covers the Screen/focus block.
Cover 2 crt's and adjust the focus control for remaining crt---(using the convergence pattern in the menu for the set)
adjust for the best focus.
cover that crt and move on to the next crt using the same procedure.
After setting the focus on all 3 tube's you will have the best focus possible for this set. If picture is still bad, you have bad crt's and the set is junk.
Cost to replace the CRT's is enormous!

May 08, 2009 | Projection Televisions

1 Answer

Fuzzy Picture

Fuzzy is a funny word. I never use it to describe a picture problem. That because fuzzy can go too many different ways. There is snowy fuzzy, blurry fuzzy, grainy fuzzy, and demodulated fuzzy. If the set goes out of focus intermittently that has something to do with the focus ciruitry. If it goes grainy that is a front end problem, usually tuner related. The other types of fuzzy are generally associated with problems in video processing some where. So, which is it?

Oh, and BTW that unit has three small picture tubes in it, one red, one blue, and one green. It doesn't have a 'bulb'.

Feb 24, 2009 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Samsung self focus


Nov 14, 2008 | Samsung HLN5065W 50" Rear Projection...

1 Answer

The picture went fuzzy (color alignment).


try going to the antenna input from the menu screen, then trying to do the auto focus, or manual focus. My Samsung won't let me do the auto focus unless I'm looking at the antenna for some strang reason.

Oct 18, 2008 | Samsung PCL545R 54" Rear Projection...

1 Answer

Fuzzy Picture when souce is not HD

sounds like you may have a problem with the digital scan card or next hyper module. i suggest calling your neighborhood tv repairman

Mar 30, 2008 | Toshiba 65HDX82 65" Rear Projection...

1 Answer

Model 34pw8520 picture got fuzzy, then fuzzy, clear, fuzzy clear, then went blank (black). Picture tube? how much to repair?

sounds more like the flyback. What is the chassis number of your set. The flyback if thats what it is would cost under 50 if you replace it yourself maybe 150 if a shop does it. But post the chassis number as the chassis number would make it easier to try to figure out if its the flyback or not.

Mar 24, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides