Yamaha RAV326 remote codes

The code, if a Yamaha Universal remote control, will be on your set up listing supplied when you purchased the remote control.

try this site: http://www.mydish.com/support/apps/remotecodes.aspx

http://www.replacementremotes.com/YAMAHA-Manuals/Buy-Download-RXV861-MANUAL-OPERATING-MANUAL-Operating-Manual.html
Try the above link to download the manual.
Gopakumar Gopalan Google

Tom Woodall,

We do have codes for a Yamaha, but our remotes are not guaranteed to work all types of equipment. I have provided some of the more common codes below, along with a link to get more!

Codes: 733, 732, 663

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Tommy Faust
DISH Internet Response Team

Hey Hiall Hollingsworth,

I would need the remote model to provide more specific codes, but a few for Yamaha Stereo are 663, and 733. You can view the link below to get model specific codes!

Link: http://www.dishnetwork.com/SupportSection/apps/remotecodes.aspx

Let me know if you have any other questions!

Tommy Faust
DISH Network

Hi my name is Mike Houston of DISH Network and I see you arelooking for the remote codes for your Yamaha RX-V795 5.1. The codes are; 733,747, 730, 731, 732, 745 and 663. To address the remote to the Yamaha you willwant to press and hold the desired mode button (TV, VCR, and AUX) until theentire mode button backlights come on, then release. The next thing you want todo is press the number 2 and enter the three digit code (the light will blinkoff after each digit is entered and then return to a steady light.) After youenter the 2 and the three digit code press the Pound (#) button, if the codeentered is valid for the remote, the mode light flashes three times. If thereare anymore questions please e-mail me at [email protected].

Without knowing the model of remote you're using I can only provide general codes.

Try codes in this order:
1. 627
2. 766
3. 505

If you can provide the # on the back of your remote at the top I can look up more specific codes for you, or you can check it out yourself at this link based on your receiver

http://www.dishnetwork.com/SupportSection/remote-setup

Tommy Faust
DISH Network

Try this link it should have all of the codes and istructions for programming our remotes.
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

Daniel Busa
DISH Network Customer Service

Here are the codes for your Yamaha RX-V367: 733, 663, 732,747, 730, 731, 745, 848, 847, 657, 786, 684, 849, 655, 823, 841, 646, 650, and651.

Step 1:
Press and hold the AUX button until all mode button back lights come on, thenrelease.

Step 2:
Press 2, and then enter the device code corresponding to the equipment (listedabove).

Step 3:
Press the POUND (#) button. If the code entered is valid for the remote, themode light flashes three times. Try using the DISH remote to control the component,if it doesn't work with one code try another.

Although we try and facilitate a one remote solution, wecannot guarantee that our codes with work for all brands and models components.Thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Support Representative

my phone say that initial programming needed can you sold this for me