Question about Raymarine Raychart 435 GPS Receiver
Hello , please we have got this problem. Our GPS Raymarine has run out of its service today and is not working . Since we really need to make it run , we need some help. Is there anything that can be done , when this error messages displays our GPS ??? : Ray Marine GPS system halted code 0x00004001 *addr=0xCOO51DF4* RC435 Chart Plotter This is only thing, that we can get from it , when we turn it on. THANKS A LOT FOR ANY ADVICE greetings from : somewhere between the GREECE islands
To get back up and running you are going to have to reset the unit. This is from the handbook:
Note: Take care - factory reset clears allWaypoint and Route databases.
➤ To perform a factory reset:
1. Power off the unit.
2. Press and hold CLEARwhilst powering up until <Erase backup procedure>
3. Either press CLEAR to abort Factory Reset and resume normal
Power-Up or press ENTER to continue Factory Reset.
4. Press ENTER again; the unit restarts as for a first time PowerUpwith
all values reset to their original factory settings
When you hit port and have an internet connection, make sure you are running the latest software version, currently listed online as version 1.09. You can download it here:
Posted on Dec 28, 2007
Tips for a great answer:
Jul 27, 2010 | Raymarine A65 Combo GPS...
Oct 27, 2009 | Raymarine Raynav 300 GPS Receiver
Jun 11, 2009 | Raymarine RL70CRC GPS Receiver
Aug 03, 2008 | Raymarine RL70CRC GPS Receiver
Jul 31, 2008 | Raymarine C80 GPS Receiver
Apr 07, 2008 | Raymarine RL70CRC GPS Receiver
Dec 02, 2007 | Raymarine RL70CRC GPS Receiver
2,249 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: