Where is the belt on a dyson upright vacuum?

I think this is what you need: Dyson DC25 DC29 Resetting the brush bar Official Dyson video

This other video shows the head coming off and belt replacement: How to replace the dyson belt on Dyson DC25 vacuum cleaner

The switch can be damaged
Dyson DC19 dB Mail Order Iron Bright Silver Mid Yellow DC19 Switch

Hi there, it's Jack at Dyson.

The type of belt mechanism will depend on which model of DC07 you own. If you have a DC07 machine without the brush control feature, the user-replaceable belt is located within the cleaner head:
http://www.dyson.co.uk/support/dc07/dc07-standard/maintaining-your-dyson-machine/change-the-belt1/belt-fitting-preparation

However, if your DC07 includes the brush control feature (you should see the Carpet/Hard floor dial on the cleaner head), your machine will use a clutch mechanism with belts engineered to last for the lifetime of the machine in normal use.

If you have a DC07 with brush control and would like some help with it, please contact us directly by calling 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Hi there, it's Jack at Dyson.

DC19 has two filters, both engineered to last for the lifetime of the vacuum in normal use. The pre-filter should be washed at least once every 3-6 months using cold water without detergent, as shown in the video below. Allowed at least 12 hours for the filter to dry completely before replacing it.

The post-filter located underneath the clear bin is engineered to capture microscopic allergens, and carbon from the motor. It does not need any maintenance - in fact, attempting to wash or clean the post-filter could cause damage to the vacuum not covered under guarantee. For this reason we advise against accessing or removing the post-filter.

I hope this helps, but if you have any questions about the filter, or regarding the performance of your DC19, please get in touch with our experts directly so we can provide further assistance. You can reach us by calling 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).

Hi David, it's Jack at Dyson.

I'm surprised to hear you've having difficulty emptying the bin on your DC19, as this should be straightforward. It's possible the catches could be a little stiff if they haven't been opened before, but our online Support guide shows what you need to do: http://www.dyson.co.uk/support/dc19t2/dc19t2/how-to-use-your-dyson-vacuum/emptying-the-clear-bin-step-1

If you do need further help after you've given this a try, please call our freephone UK Helpline on 0800 298 0298, or email us at [email protected]

Best wishes,

Jack
Dyson Online Customer Support
www.dyson.com

Hi, it's Jack at Dyson.

You may be able to resolve your problem by following these simple steps:
http://www.dyson.co.uk/support/help.asp?article=1502&product=DC24-ALLFLOORS

If you're still experiencing difficulties, please get in touch with us, free, on 08002980298 (UK), or 1866MYDYSON (US).

Kind regards,

Jack
Dyson Customer Service

You can use the below site to find a shop near you.

http://www.dyson.com.au/support/wheretobuy/

Replacing the belt is pretty simple.

If you visit http://www.sparesaver.com/help-and-support/dyson-section/dyson-technical-advice-450/ they have alot of info on repairing dyson cleaners AND they sell the parts, cheapest ive seen online.

Hope that helps

It might be a simple as changing the clutch belt and the drive belt and cleaning out the brush roll. You can get replacement belts here:

Dyson DC07 Belts