Question about CD Players
Table swings to almost the right cd , then can't decide exactly what slot or maybe alignment with that slot
I reckon that they are not being put back correctly by the loading mechanism! This is a common problem with these units. It is highly unlikely that they are actually falling off the carousel.
Open the unit, and watch it as it loads and replaces the cd's from the carousel. You will probably find that instead of grabbing the disc off of the spindle and putting it back, it might be grabbing before the cd is even in its grip. This then simply bumps the cd out of the way, and it will fall inside of the unit.
The good news is that it can be fixed with a bit of very gentle bending and persuading. But be very carefull when doing this!
Posted on Mar 07, 2009
SOURCE: won't load cd ,, intermitten
check all loding belt or replaced part no:
Sony 4-982-867-01 BELT, LOADING MOTOR
Sony 4-962-822-01 BELT, T.T. MOTOR
Sony 4-210-030-01 CD DOOR MOTOR BELT
Posted on Apr 04, 2010
What worked for me was taking the cover off and carefully threading a belt back onto a wheel. There are two motors at the back of the unit, one (I believe) that grabs the discs and moves them in & out of the player, and a second one that rotates the table (i.e., the round slotted thing that holds all the discs). The belt had simply slipped off the wheel that drives the latter. I did remove the back panel as well, to access it better, and inadvertently disconnected a sensor plug, which led to a second round of troubleshooting, but - in the end - I got it working!
Posted on May 29, 2011
Tips for a great answer:
Jul 30, 2014 | Sony MegaStorage CDP-CX355 300-Disc CD...
Feb 03, 2014 | Sony CDP-CX335 300-Disc CD Changer
Oct 19, 2012 | Sony CDP-CX350 300-Disc CD Changer
Feb 03, 2010 | Sony CDP-CX300 CD Player
Oct 24, 2009 | Bose CD Players
Jan 22, 2009 | Sony CDP-CX235 200-Disc CD Changer
Nov 28, 2008 | Denon Dns1000 Table Top CD Player CD...
118 people viewed this question
Usually answered in minutes!