Question about MPC Computers TransPort T2300 Notebook

1 Answer

My MPC t2300 laptop wom't turn on.

I pressed the "on" butten, nothing. It's fully charged. Tried electrically, nothing. I assume it's a keyboard problem (butten failure).

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 84 Answers

The Transport T2300 has an internal battery that will run the laptop for several minutes after the main battery goes dead. This feature allows you to save your work and shut down safely. If you run the laptop until both batteries are dead, even a brand new battery can't start the unit again. You have to follow this procedure:
1.Unplug power cord

2. Remove any attached periphal components including the cd rom and/or floppy disk module if you have one. Both remove with a push button switch located on the bottom of the unit.

3. Plug in power cord and charge the unit for a minimum of 24 hours straight. 30 hours is better. This whole time will be spent slowly recharging the internal back up battery.

4. Once that is done, unplug power cord again and reinstall any floppy/cd drives. Plug power cord back in now and charge for at least 24 hours again.

If your backup battery is dead, you can't charge the main battery or turn the unit on. The longer you charge, the better. We had one unit here that had to be on the initial battery backup for 72 hours before it finally took hold. Then, one overnight recharge on the regular battery and all was well.
If you need drivers or manuals for the 2300, all are available on cd at [email protected] for around $9.50 including shipping, handling, and owners manual

Posted on Apr 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reseting mpc t2200 to factory settings


turn the laptop off and then on and watch the screen carefully. It will usually say something like Press F11 (or some other key) for Restore. Press the stated key while you can still see the message.

answer found here: http://uk.answers.yahoo.com/question/index?qid=20080418062022AAq1ycb

Dec 10, 2012 | MPC Computers TransPort T2300 Notebook

1 Answer

Can not find finger print sensor device for mpc t2300


appears to on middle right under keypad for number to far right

Jun 03, 2012 | MPC Computers TransPort T2300 Notebook

1 Answer

MPC Micron T2300 Hard Drive Cable.Where can you buy one.


Hi,

You can get the item needed for your device at ebay.com, it is a convenient place to buy computer and laptop accessories.

Take care.

Nov 19, 2010 | MPC Computers TransPort T2300 Notebook

1 Answer

How do i get my MPC laptop TransPort T2300 Finger Print scanner to work? I tryed runnin my finger across it nothin happend .


Did you enroll your finger print first?
If not, log onto your account, and start the protector suite
go to the passport section, and set up a passport for your account.

Sorry if this isn't very clear, but I don't have the suite anymore, I'm running windows 7 on my t2300

Oct 12, 2010 | MPC Computers TransPort T2300 Notebook

1 Answer

Can't get the back cover off a MPC transport 2300 laptop, removed all visible screws


The remain screw is under the Keyboard, to open it, you need to open the lid around the keyboard unit, it use only a small clip, with small screw driver you can lift up the lid.

To do this, please be careful, it's a small things..

Feb 26, 2010 | MPC Computers TransPort T2300 Notebook

2 Answers

Micron PC will load windows, but then nothing!!


turn off pc.
turn on pc...as it boots press f8 to get into safe mode.....
when in safe mode ..
restore pc to earlier week


Sep 15, 2009 | MPC Computers TransPort T2300 Notebook

1 Answer

How can I replace the keyboard on a mpc transport


LOOK where your speakers are , just in front there is a cover where your font keys are talk a small screwdriver pull cover off you will see two screws that it put out the keyboard the pull you cable , note reinstall just backward...good luck.....

Aug 15, 2009 | MPC Computers TransPort T2300 Notebook

Not finding what you are looking for?
Computers & Internet Logo

766 people viewed this question

Ask a Question

Usually answered in minutes!

Top MPC Computers Computers & Internet Experts

Toby Lee
Toby Lee

Level 3 Expert

409 Answers

Joaquim Martins

Level 3 Expert

1127 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a MPC Computers Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...