Question about Uniden TRU9485 Cordless Phone

4 Answers

TWX977 submersible unable to base register

Unable to register the twx977 submersible phone to any base. It came with the Tru9485 series. Please help.

Posted by on

  • 2 more comments 
  • Anonymous Apr 26, 2008

    This is the solution that came in the owner's manual. It doesn't work. Been trying for two days. Any other thoughts? I'm going to take the battery out and do a hard reset that way.

  • lisarbell Feb 12, 2009

    The menu for TRU9485 doesn't have a REGISTER HANDSET selection as the manual says that it does. Have tried the other method for other models as suggested and that doesn't work either. Anyone find a solution?

  • Anonymous Feb 15, 2009

    me too - help!



  • Anonymous May 03, 2009

    I did what you said I disconnect adapter from the base, and then
    hit the # key, and it said handset registering, and then it said
    register failed. Now what?

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Push menu on base station - select register phone

push # sign on twx977 phone at the same time

phone will register on 9485 base station and unit

Posted on May 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Disconnect the base AC adapter.
•While holding the [find hs/intercom], reconnect the
AC Adapter.
•On the handset, press and hold [#] until the display
reads HANDSET REGISTERING and you hear a
beep.

Posted on Feb 13, 2008

  • DoubleJ2U Sep 24, 2010

    tried all other suggestions with the TWX955 submersible handset and only this worked. Again, unplug AC power supply to main base unit, hold down intercom while simultaneously plugging power back in, hold # key on submersible handset phone unit, and it will register. Thank you!!!!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Push and hold the the Red Hang-Up key and the # key at the same time. Two options will appear on the handset. Select "Base Station Unavailable"

Confirm with the "YES" option and the handset will display "Handset De-registered"

From the Base Station, select menu and then "Register Handset"

The base station will display a message stating, "On handset, hold # key for 2 seconds"

Press and hold the # key on the handset for a few seconds and you will hear the beep as the phone and base station confirm registration.

Done

Posted on May 25, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a similar problem with a regular handset that I ordered separate to go with my base. Taking the battery out wouldn't reset it. If you push the red hang up key and the # key for at least 5 seconds, it will give you the option to deregister it, even if you don't have it registered to a base. It reset it brand new. Tried registering it again, and it worked! HTH

Posted on Apr 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A message signal and message light is on permanently when there are no messages. How do I stop the message signal?


You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

Apr 08, 2014 | Uniden 24-148 Cordless Phone Base...

1 Answer

How can I register a Uniden wireless phone handset, model TWX977 to a Uniden wireless base, Model D-1680?


Sorry, you can't. The two phones use completely different communication methods. It would be like trying to feed a VHS videotape into a DVD player. They both contain video data, but in completely different formats.

Sorry if that wasn't the answer you wanted to see. But there it is.

Jan 12, 2014 | Uniden DECT 6.0 Cordless Phone ID

4 Answers

I have a uniden Tru9466 base station and a uniden TWX 977 that the later that was previously registered with the first displayed a out of range notice so I went thru the process in the owner's manual...


Welcome to FixYa.

  1. Turn OFF your handset (TWX977) and any other handset registered to the base (9466).
  2. Unplug the base from its power source.
  3. Unplug the phone line from the base.
  4. Wait for 15 mins.
  5. Plug back the power source and the phone line.
  6. Turn ON the handset (TWX977)
  7. Reset the handset (TW977) by doing the following:
  • Press the MENU soft key. Select the DEREGISTRATION submenu.
  • ARE YOU SURE? appears. Move the cursor to select YES. Press the OK soft key.
  • To clear other handset information, please follow these steps:
  • From the handset, press and hold [ ] and [#] for more than 5 seconds. Select the DEREGISTER HS submenu.
  • Move the cursor to select the handset ID to be de-registered from the list, and then press the OK soft key.
  • DEREGISTER HS appears. Move the cursor to select YES. Press the OK soft key.
  • ARE YOU SURE? appears. Move the cursor to select YES, and then press the OK soft key. You will hear a confirmation tone.

8. Register the handset by doing the following:
  • With the base in standby, press the MENU soft key.
  • Move the cursor to select REGISTER HANDSET. Press the OK soft key.
  • On the handset, press and hold [#] until you hear a beep.
  • While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION
  • COMPLETE is displayed; the handset has been registered to the base. If REGISTRATION FAILED appears,
  • please try these steps again.

Thank you for using FixYa.
Have a great day.
Jas247

Aug 22, 2011 | Uniden TRU9466 Cordless Phone

4 Answers

Reset base unit of Uniden TRU9485


Uniden TRU9485 (This didn’t work for me but this was the first instruction from Uniden Tech Support)

TO RESET THE BASE UNIT:
Unplug the base unit AC adapter.
Hold down for 15 seconds the DND, * and “menu” soft key (the middle silver soft key under the LCD) while plugging the base unit AC adapter back in.
All the settings should be reset.

Uniden TRU9485 (Worked for me)
ALTERNATE WAY TO RESET THE BASE UNIT:

Unplug the base unit AC adapter.
Hold down for 15 seconds the DELETE KEY (zero with a line through it) while plugging base unit AC adapter back in.
All the settings should be reset.

May 28, 2009 | Uniden Lands Phones

1 Answer

Unable to register handset TWX955 Series


I have a TRU9585 Base.

On the BASE press menu/select, scroll down to register handset using the button to the right of the display, and press select. The LED on the base will flash quickly.

Now pick up the TWX955 handset (the one that won't register), and press and hold # until it registers.

Worked for me.

Mar 15, 2009 | Uniden TRU9585-4 Quad Cordless Phone

1 Answer

How do you register a waterproof phone (TWX977) to a TRS9585


Not sure if you still have this problem, but...

Basically go on you base unit, and hit "MENU/SELECT". Scroll down to "REGISTER HANDSET" and click "MENU/SELECT". On your waterproof handset, hold the "#" key until it displays "REGISTERING HANDSET". And voila! After that finishes, your waterproof handset will be good to go!

Feb 03, 2009 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

How do you unregister a defective handset so that it can replaced


1. Delete or listen to all voice mail messages, if necessary, to clear the IN USE/Voice Mail light indicator.
Note: Skip this step if it does not apply to your MD Series cordless telephone model.
2. Press OFF on the base station and each handset.
3. Press and hold down PAGE on the base station until the IN USE light flashes slowly, then release.
4. Press and hold down PAGE again until the IN USE light begins to flash quickly, then release PAGE.
5. Quickly and fully press and release PAGE again.
6. Please register handset displays. Press OK to begin the registration process, or press EXIT.

Dec 10, 2008 | Motorola Mobility MD41 Expandable Handset...

Not finding what you are looking for?
Uniden TRU9485 Cordless Phone Logo

1,730 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8016 Answers

Cindy Wells

Level 3 Expert

5346 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...