- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Below are instructions to adjust brightness on HP laptop
Press the "Fn" key with the computer turned on and hold the key.
Press the "F7" or "F8" key on some HP laptops, which are
printed with a small sun icon on the key. The sun icon is filled on the
function key for dimming the laptop. The other key is printed with a
hollow sun icon for brightening the screen.
Press the "Fn" and left arrow keys together on some HP
laptops to turn down the brightness. The "Fn" and right arrow key will
increase brightness. Press and release the right arrow key repeatedly,
while holding down "Fn," to decrease the screen brightness slowly, or
hold the keys to darken the screen as low as the setting will go.
For HP Monitors
Press and hold the down arrow key on the front panel of the
monitor below the screen to turn down the brightness on the external
monitor to the lowest setting.
Repeatedly press the down arrow button to dim the monitor gradually.
Press the up arrow key on the monitor to increase brightness.
Good Morning! With the 8 years operations of your emachines monitor, some of its electronic parts might incurred cold solder joint connections from its circuit board & possibly some of its Capacitor parts are already worn-out. please try to get assistance from an electronic service technician which will surely diagnose & repair the problem. best regards.
I have exact same problem but mine happened to 2 of my x2gen monitors at the same time,really strange.
One was purchased 01/07 and the second 04/07
Took my PC in, no problems
Took one of the x2gen in,was told monitor is bad
How could both monitors go bad at the same time???????