I have a Whirlpool Ultimate Care II that has run reliably for years. Today it stopped just after the wash cycle and now the tub is full of soapy water with a load of clothes. I have tried moving the dial around to other settings - nothing happens. The dial does sound like it's trying to move between the wash and rinse cycle - but never completes and just stops.
I have ready the other posts and have tried pushing down on the lid and even "hitting" it - nothing happens.
Thanks for any assistance as soon as possible
The lid switch is the culprit. Push down on the lid it should start. It needs to be adjusted . the tab on the lid is not activating the switch. Try triming the door bumpers.
445 views
Usually answered in minutes!
I have a Whirlpool Ultimate Care II that has run reliably for years. Today it stopped just after the wash cycle and now the tub is full of soapy water with a load of clothes. I have tried moving the dial around to other settings - nothing happens. The dial does sound like it's trying to move between the wash and rinse cycle - but never completes and just stops.
×