Question about Philips 8-Function Universal Learning Remote with TiVo and Replay Compatibility

3 Answers

Lost codes for 4 in one used for universal remote control

I bought a new remote a month ago.I program it with the codes,for the TV, VCR. Iaccidently grabed the control and pressed a wrong button codes, were no longer in use .I seem to have misplaced the paper work , to reprogram for Sanyo TV, and Panasonic VCR.I do not want to buy a new one since this one was bought in July of 07 Thank You Beverley Atherley

Posted by on

  • 14 more comments 
  • Anonymous Nov 05, 2007

    direct tv dvr code

  • Anonymous Nov 06, 2007

    I have a Zenith remote and a Sanyo tv. I programed it and all was working until i hit a wrong button. Now the remote will not work.

  • Helen Morin Nov 19, 2007

    lost code for one in all remote to use for magnovox tv

  • Anonymous Nov 19, 2007

    need codes for sharp tv

  • sexxy rhon Nov 23, 2007

    i lost my paper work to get the codes for my GE tv.

  • Anonymous Dec 12, 2007

    need a tv code

  • Anonymous Dec 24, 2007

    NEED CODES FOR gO VIDEO DUEL dvd

  • Anonymous Jan 03, 2008

    4 in one universal remote

  • shiva1 Jan 10, 2008

    need codes for phillip magnavox remote withh 4 unit control lost mine

  • kariaiden Jan 10, 2008

    i need code to remote

  • col col Mar 17, 2008

    lost my philips magnavox univeral 4 in one remote, don't know the code for my tv and cable. I have a toshiba TV . I manually turn on the tv, press code searh button until red light comes on then i entered 517 which was the code for another toshiba tv i had, but that doesn't work.

  • pourhouse06 Mar 27, 2008

    code for cable comcast

  • b7hobbs Jun 08, 2008

    i to need the code to my tv its a toshiba and the remote is a rm24930 general electric universal remote somebody help me

  • ja88on---- Jun 11, 2008

    philiphs universal remote

  • mutimbodkc Jul 21, 2008

    I bought a MG3S universal remote control, I have an Symphonic T-19wf color tv 19" tried the codes in the book, none of them seem to work. AQny suggestions.

  • grossel_saul Jan 05, 2009

    I have a old goldstar tv and a magnavox unversal contro. how do I program

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have philips tv need code to program total control remote can anyone help please

ali

Posted on Aug 26, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My kids threw away the instructions and than took out the batteries so now the codes are erased from my philips universal remote. i just need to know the codes for a sanyo tv it was the 1st code listed for that tv brand and the 3rd code listed for an emerson dvd player. thanks

Posted on Jun 25, 2008

Ad

DRC800 Sanyo TV 0799,0154,0893 Panasonic VCR 0035,0162,1062,0616,0225,1035 press device key for 6 seconds led will blink solid key in code correct code will cause led to blink 3 times press power button to confirm code works. rg

Posted on Sep 14, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

6ya.com

6ya - Get Instant Help

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you program it to a GE universal remote
these are the codes
LG: 004 005 009 012 050 057 080 156 227 338

  • How to Program a GE Universal Remote ' Techwalla https://techwalla.com/content/program-ge-universal-remote Lost your Remote? Need help programming your GE Universal Remote? Most TV's, VCR's, DVD Player's, Cable and Satellite Boxes will work with a GE universal...
  • How to Program GE Universal Remote: Quick Steps www.brighthub.com > Electronics > Home Theater > Home Media 2011-04-18 · How to Program GE Universal Remote Using the Code Search Function. If you've tried the codes listed for your device brand and are unable to get your ...
  • GE Universal Remote Codes and Instructions ' direcTutor www.directutor.com/content/ge-universal-remote-instructions Goto GE remote Codes. Direct Code Entry for GE remotes with 4 digit codes. 1. Manually turn on the device (TV, VCR, DVD, etc.) you wish to program.
  • How to Program a GE TV Remote ' Techwalla https://techwalla.com/content/program-ge-tv-remote GE universal remote controls allow users to program multiple devices onto a single remote. The remote control uses codes to detect the device, and you can...
  • GE Universal Remote Quick Start Guide - YouTube Youtube
    • BY JASCOPRODUCTSCOMPANY
    • 3 MIN
    • 216K VIEWS
    2013-04-18 · Video embedded · http://www.jascoproducts.com Eliminate remote clutter with GE Universal Remotes
  • How to Program a GE Universal Remote Control ' eHow www.ehow.com > Tech > TVs > Remote Controls
    • BY EHOW ELECTRONICS EDITOR
    Programming a Jasco/GE Universal Remote Control takes about seven steps. As with programming other remotes, you need to know the code of the component you are ...

    • May 09, 2016 | LG "32"" inch New 2011 HD LCD TV With HD...

    2 Answers

    I have a all for one remete urc#4063b06 need code for samusung tv/vcr modelcxa192680b
    There is no code for Samsung TV/VCR combo units. Try the Samsung VCR codes: 240, 045 and the Samsung TV code: 060, 427, 056, 030, 019, 178 . Program the VCR and the TV buttons separately.

    Most One for All universal remote manuals and code lists are available from: http://www.oneforall.com/support/manual . You may need to change the country listed at the top of the page. Then use the drop down menus to select Universal Remote and the model. The direct link to the manual for the URC4063 is http://www.oneforall.com/uploads/support/00b313f46269f3fc78988edae4518f03.pdf .

    Please note that the codes programmed into a universal remote are limited to those for devices released 6 months or more before the remote was programmed. If your TV/VCR is newer than your remote, you may need a new remote.

    I hope this helps.

    Cindy Wells

    Oct 03, 2011 | One For All URC-3021 Remote Control

    1 Answer

    I have a Trutech PLV1615T TV and a RCA RCR311 Universal Remote that I lost the info for. How can I get them to talk to each other....Thanks, Tom
    RCA Universal Remote Control Programming Codes Programming Your Universal Remote.The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes: y TV-000 y VCR-000 y Cable Box-000 y AUX is programmed with VCR code 037For brands that require programming, there are two ways to program: Using Code Lists or CodeSearch. Use Code Search if the code lists are not available or if the codes from the lists do notoperate a device.Programming a Device using Code Search:1. Manually turn ON your device (TV, VCR, Cable Box)2. Press and "HOLD" CODE SEARCH3. Press and release the device button you want to set up (TV, VCR, Cable Box) However,if you are using AUX for a device, press and release AUX first and then the devicebutton for the type of device to be programmed (TV, VCR, or Cable). The selecteddevice button will flash once.4. Release CODE SEARCH.5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100times at a rate of once per second).6. Once the device turns off, press and release ENTER.7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6...Hope this helps! Parsos215

    Sep 20, 2011 | RCA Universal Remote Control

    1 Answer

    I lost my original remote control for my AIWA combination TV/ VCR. VX-S135 ? I bought a universal remote control but there was no code listed for an AIWA TV. Just a VCR. I need to know the code to the TV...
    Hello,

    what's the name/make and model of the remote?

    Without me knowing the type of universal remote, there is no way I can get the right code for your TV.

    I look forward to your reply.

    Bye for now.

    Jun 24, 2010 | Aiwa Televison & Video

    2 Answers

    Cannot find remote code for panasonic TV/VCR combo for RCA remote
    Here is a list of codes for your remote. Please follow any of the links below to get your codes.
    Results 1 - 10 of about 324,000 for rca universal remote codes. (0.26 seconds)
    Search Results
    1. RCA Universal Remote Control-Programming Codes RCA Universal Remote Control-Programming Codes. ... The remote may already be set up to operate your brand of TV, VCR, or Cable Box. ...
      www.thompsontv.com/rcarc.html - 33k - Cached - Similar pages -
    2. How to Program an RCA Universal Remote Without a "Code Search ... wikiHow article about How to Program an RCA Universal Remote Without a.
      www.wikihow.com/Program-an-RCA-Universal-Remote-Without-a-%22Code-Search%22-Button - 42k - Cached - Similar pages -
    3. Universal Remote Control Codes Codes and links for a number of universal remote controls, including Sony, RCA, Memorex, Radio Shack, One For All and more.
      www.xdiv.com/remotes/ - 73k - Cached - Similar pages -

    May 05, 2009 | RCA Universal Remote 3 Device Remote...

    1 Answer

    Bought a fairly used 2003 HDTV 4 months ago, Didnt come with remote but got a Universal I used that worked, my friend took the batteries out for a while for something else, we put the batteries back in...
    Hard to say what the code is without knowing the model number of the remote and the brand of TV.

    RCA's website has a remote code finder you can use.

    Good luck!

    Dec 17, 2008 | RCA Universal Remote 3 Device Remote...

    1 Answer

    PROGRAMING MY MAGNAVOX UNIVERSAL REMOTE CONTROL
    http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
    This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

    Programming with Code Search

    1. Manually turn on the device (TV, VCR, etc.) to be controlled.

    2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

    3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

    4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

    Hope this helps :)

    Jun 18, 2008 | Philips Magnavox Learning Universal Remote

    8 Answers

    Universa remote codes.
    I used Memorex code 135

    Jan 20, 2008 | Disney DT1350-P 13" TV

    2 Answers

    CODES FOR MY UNIVERSAL REMOTE
    Try www.remotecodelist.com .........T.

    Dec 22, 2007 | Philips Universal PH301S Remote Control

    1 Answer

    Remote control codes
    Please give us the make and model of your universal remote and we may be able to help more other than that the best i could find were 195 and 196 - try them out Hope this Helps:)

    Mar 18, 2007 | Aiwa VX-S205 Combo

    Not finding what you are looking for?

    View Most Popular

    8-Function Universal Learning Remote with TiVo and Replay Compatibility

    • Televison & Video

    Related Question

    How do you program it to a GE universal remote

    • LG "32"" inch New 2011 HD LCD TV With HD DivX 32LK332"

    Open Questions:

    0 Answers

    Samsung was her won’t power on

    Apr 22, 2018 | Samsung Televison & Video

    0 Answers

    disable tray lock in sony dvp -sr320

    Apr 22, 2018 | Sony Televison & Video

    0 Answers

    The volume on our emetic ota goes up and down on its own

    Apr 22, 2018 | Televison & Video

    0 Answers

    Ez digital antenna question where I live I only have satellite antenna will that still work to receive channels or would I getany

    Apr 22, 2018 | Televison & Video

    See all Philips 8-Function Universal Learning Remote with Questions

    Related Topics

    Philips 8-Function Universal Learning Remote with TiVo and Replay Compatibility Logo

    896 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Popular Questions

    Philips 20PT6441 20" TV

    Philips SAA7130 TV Tuner/FM...

    Philips PM3S Remote Control

    Philips Magnavox Learning...

    Philips Magnavox Learning...

    Check Out the Latest HD Televisions Report
    Check Out the Latest HD Televisions Report

    View all Fixya Reports

    Top Philips Televison & Video Experts

    The Knight
    The Knight

    Level 3 Expert

    75169 Answers

    matt martin
    matt martin

    Level 3 Expert

    1213 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...