Question about Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15

1 Answer

Machine cant get any water.

Hi my fisher paykel washing machine was leaking a small puddle of water under the machine itself and also the display screen panel said that it wasn’t getting any water it may have been on rinse at the time. I restarted the wash 3 times every time it would fill with water but stop I think it was on rinse cycle and the display screen would say that it can’t get any water.

Posted by on

  • jen kinna Sep 13, 2007

    yes it would fill with water at a start of a cycle but when it got to rinse it stated that it could not get any water. and it was filling to the correct height at the start of a cycle



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Does the water fill to the correct level ?

Posted on Sep 11, 2007

  • john phillips Sep 11, 2007

    I ma confused by your post . You say " the machine cant get any water" yet then you write that it "would fill with water " ???

  • john phillips Sep 14, 2007

    However, does it complete the rinse(inspite of what the display says) and then spin out to finish the complete wash cycle. ?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does it leak, even when machine is not running?

Small leak/drip with Fisher & Paykel GWL11 Washer (with ... > Home Forums > Laundry Room
May 6, 2008 - Got a small drip/leak with my GWL11 washer..... The washer is ...Small leak/drip with Fisher & Paykel GWL11 Washer (with pictures) ..... New project for a new year: Light a fire under plans for an outdoor oven and claim the best pizza in town ... Speed Queen Front Load AFN50 Washer Review - Long Post.

Fisher and Paykel GWL11 Top Loading Washer > Home Forums > Laundry Room
Mar 5, 2008 - My GWL11 Top loading washer has had nothing but problems! ... I have a Fisher Paykel GWL11 that I purchased new and have loved until this problem started. ... The machine fills with a small amount of water to saturate the clothes ...... Fault 36 is related to water leaking, but is *not* the kind of leaking from ...

Fisher and Paykel GWL11 Top Load Washer - faqqq
Question Product: Fisher and Paykel GWL11 Top Load Washer Question Details:Fisher Paykel ... Small leak/drip with Fisher & Paykel GWL11 Washer (with .

Dec 12, 2015 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher and Paykel Washing Machine model mw512

this sounds like the motor controller cant start the motor. I would be looking at the motor controller itself.
when it's filling with water, does the bowl go around slowly?

Sep 11, 2013 | Fisher and Paykel Washing Machines

1 Answer

Fisher & paykel fault "F1" is displayed on the top

F1 means the flood sensor senses water at base of machine at PC board.
You need to take out bottom drawer and check for water puddle under where the drawer was.If there is water you can get the machine going again by comletely drying it out(F1WILL CLEAR),but it still means you have a leak.With bottom drawer out you can really see whats going on.Once F1 is clear you can actually run upper drawer and see if it leaks.Most likely culprit are the lid actuators.Replace all 4 . It'll run like new.Don't overload drawer .That can cause lid leak too.Also the PC board may be damaged and may start to go crazy giving fake F1 codes.$80 easy fix.
good luck

Jul 27, 2011 | Fisher and Paykel 23 in. DD603H SS...

1 Answer

Fisher Paykel Ecosmart washing machine spills water.

sometimes too much detergent, or extra cleaners like oxy clean) will cause lots of foam which will cause the water level sensor to misread, or foam over the top of the drum. if this is not the problem, you will have to tilt the machine on its side and look for loose or damaged hoses. the play in the tub will not cause leaking

Jul 10, 2009 | Washing Machines

1 Answer

Fisher & paykel smart drive washing machine leaking water

If your washer is still under warranty, I would call the company and have them send someone down. If the leak is from either the drum itself or a seal then I don't think you could handle it yourself. But, first make absolutely sure that it's not from any hose connection. Tighten all the connections, especially those to the drain pump. And check the pump itself for any leaks.

Mar 02, 2008 | Fisher Paykel EcoSmart GWL15

1 Answer

Washing machine

Depending on the age of the unit:

Possible minor leak at the pump.
Possible leak at the spin bearing/boot seal.

Dec 30, 2007 | Fisher and Paykel IWL12 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides