Question about GE PSC23SGR Stainless Steel Side by Side Refrigerator

3 Answers

PSC 23 SGRD Not working

The lights are on, but none of the digital controls are working. I get a "HRS" message as well? I have already unplugged and plugged back in.. any ideas?

Posted by on

  • Anonymous May 22, 2008

    Mine is two years old with basically the same problem, but only the water light works. I called GE and they wanted $99 dollars just to come out- nothing about a free board- only the sealed refrigeration area has an extended warranty.

  • Eunice Lawson-Orr Aug 11, 2008

    digital controls are not working, lights are on and i'm getting a HRS flashing message

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The water dispen and the ice maker on my side by side on my whirlpool refrigerator does not work

Posted on Dec 29, 2008

Ad

This is a known issue to these refrigerators... the Main Board most likely went bad, mine has gone bad two times!. Call GE and they will come and replace the board without charge, even if it is outside the 1-yr warranty.

Posted on Apr 07, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

1. Can anyone tell me the length of warranty on the PSC 23 GRD SS refrigerator? Purchased in 2006.
2. Water and ice despenser light is on but not working.
3. Both refigerator and freezer temps not working.

Please advise on solution to problems. Thanks.

Posted on Mar 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

All messages have been deleted but message button keeps binking?????//


Most of the time your home phone service has a digital voice mail like your cell phone does. If the answering machine is set for an amount of rings that is too long the digital voice mail service will answer before your machine. The new cordless phone indicators do show messages on your digital voice mail as well as the answering machine. Depending on your home service, most of the time when you press talk and you hear a different non standard dial tone(mine pulses 3 times before going to solid dial tone) you have a digital message. You need to delete this message before the indicator light will stop flashing. Then set up you digital voice mail for a longer pickup time! This should get rid of this problem.

Mar 07, 2011 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

The hourglass on my HP psc 2410xi Photosmart wont go away. I have already unplugged it and replugged it back in and it still wont go away. I can't do anything with it.


Reset the All-in-One to the factory default settings by using these instructions:

1. Unplug the power cable from printer when the printer is powered on and wait for 20 seconds.

2. Then, press and hold # and 6 while plugging in the power cord.

Continue holding until it displays Semi Full Reset message in the front panel of the All-in-One.

Apr 09, 2010 | HP PSC 2410 All-In-One InkJet Printer

1 Answer

Printer will not complete initialization boot


Reset the product
The error message might disappear after you turn off the product and turn it on again. After you make any adjustments to the cartridges or the printhead, reset the product in order for the error message to clear completely. Follow these steps to reset the product.
  1. Press the Power button to turn off the product.
  2. Disconnect the power cord from the back of the product.
  3. Wait 30 seconds.
  4. Reconnect the power cord to the back of the product.
  5. Turn on the product by pressing the power button.
Check the product control panel display. If the error message disappears, you are done, and you do not need to remove, clean, and reinstall the printhead.

Regards,
Riztech

Mar 24, 2010 | HP PSC 1610 All-in-One Printer, Scanner,...

1 Answer

HP Printer will no longer scan


Hi Keithcarrol

Please do the following
1. Go to Control Pannel then sellect Add/Remove Programs and uninstall all HP Software.
2. Disconnect all Prinetrs
3. Go to Control Pannel then sellect Printers and Faxes make sure there is no Printers in there if there is delete them
4. Install Psc 2210 software and follow instructions on when to connect printer.

Dec 15, 2008 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Flashing lights and 00C515C4 error message


Hello,

According to Hp's website the product needs to be restarted in a particular way. The link below will give you step by step instructions.

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00489814&dlc=en&product=3204464

Thanks

Aug 10, 2008 | Office Equipment & Supplies

1 Answer

Hp psc 2175v all in one


RAISE COVER LOOK FOR big silver bar that ink cartridges ride on apply 2 or three drops of 3 in 1 oil to the top of this bar and then try to print

Jan 03, 2008 | HP PSC 2175 All-In-One InkJet Printer

1 Answer

Scanner Failure Message keeps popping up


Here it is all over, with all the steps.

1.Unplug power cable from printer.

2.Hold Cancel and Enter. OR you could Hold Cancel and Black Copy Button. Whichever is easier

3.Then plug back in the power cable, while still holding those 2 buttons.

4.It should turn on, lights blink, then it should say FULL RESET on the little screen thingy .

5.Let go of the buttons, and hopefully, it fixed your problem.

Nov 29, 2007 | HP PSC 750 All-In-One InkJet Printer

Not finding what you are looking for?
GE PSC23SGR Stainless Steel Side by Side Refrigerator Logo

348 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Sal De

Level 3 Expert

2694 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

richie46

Level 3 Expert

12962 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...