Question about GE Profile JGSP44 Dual Fuel (Electric and Gas) Kitchen Range

1 Answer

GE Profile gas range

We were given a gas range. We are trying to install it, we don't have the manual but the installation guide says we need a "vented filler strip to go behind the range and the wall to vent heat when set on the self clening mode. Is this really necessary. We would have to order this part and as far as I can figure it would cost almost $100.

Posted by on

  • suzalah Sep 29, 2007

    Thanks for the advice. After asking a salesperson who had sold our particular model range for years we went with his advice that the strip was not necessary for our model. The model we have has a vent running the length of the back of the stovetop. Thanks again!



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I would highly suggest using the filler strip or do not use the oven in self-cleaning mode. You may be able to get the one previously used with the oven if there was one.

Posted on Sep 28, 2007


1 Suggested Answer

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Installing lower oven door on GE profile gas oven`

Removing or Reseating Oven Door To remove most oven doors:
  1. Open door to the BROIL POSITION, where you feel hinge catch slightly.
  2. Place your hands on both sides of the door near the handle.
  3. Lift the door up and away from hinges.
  4. If the door does not readily lift off, there may be 2 phillips head screws on the inside of the door down near the hinges that are holding it on.

To replace the door:
  1. Place your hands on both sides of the door near the handle.
  2. Resting door against knee, line up door with hinges and slip into place.

For instructions specific to your model, check your Owner's Manual or Installation Instructions. Download a copy of your Owner's Manual and/or Installation Instructions

Aug 11, 2016 | GE Profile 30" Self-Cleaning Freestanding...

1 Answer

Need to disconnect child resistant restraint?

GE Oven Manuals - Free Kitchen Appliance User Manuals > ... > Oven > GE > Kitchen Appliance GE
Products 1 - 50 of 292 - General Electric Roaster Oven Instruction Manual. Pages: 0 .... GE Built-In Gas Oven Use and Care Guide Model: JGRS14. Pages: 0 ...

Sep 19, 2015 | GE Kitchen Ranges

1 Answer

How do I light a pilot light on a GE profile oven?

Modern ovens, especially Profile top-of-the-GE-line don;'t usually have pilot lights. Light with electric element when thermostat is good.

Aug 26, 2014 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Replacing existing gas range

A " gas range installation kit " should not be required if you are replacing an existing unit. Some retailers "require" you to purchase things like this, or a new range cord for a new electric range, etc., but it is just their way of getting you to buy more. When purchasing a washer, some retailers will not even disconnect or reconnect you water supply lines. I'd sugest trying a smaller, independent retailer who actually has their own service staff in case you ever have any problems. The big boxes don't do service. (they tell you to call some 800 number) In the US, try for a GE dealer. Tell them who you had planned on buying from, and the price they quoted. The independents usually can get your product faster and at about the same price. (make sure the independent you go with does their own service)

Jun 30, 2009 | GE Kitchen Ranges

1 Answer

I can't find my manual, and I need to unhook my gas range. How

Ranges are real easy to install. Here is a manual to instell them. go to page 42 for the info. It might not be your model but the all hook up the same.

Good Luck and Please Rate

Jan 22, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE44XL propane to gas

contact the gas company and they will install the kit needed for the conversion. I hope this helps.

Jan 21, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

Can I use oven cleaner on the inside of the oven?

yes to both you can but make sure when you wipe it out to get all the residue

Dec 29, 2008 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

How to on GE Profile

Try this web link. If this isn;'t the model your lookin g for , you can use the search function on  the web page, or go to the home page to begin you search. GE has manual that you may view on line or download and print.

Nov 29, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

1 Answer

GE Profile Spectra JGBP85WEB5WW

im assuming you dont have to light the pilot.if thats the case and you replaced the ignitor assembly it could possibly be the ignition module/board.

Aug 13, 2007 | GE Profile Spectra JGBP90 Gas Kitchen...

Not finding what you are looking for?
GE Profile JGSP44 Dual Fuel (Electric and Gas) Kitchen Range Logo

131 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Ismael Rodriguez...

Level 2 Expert

172 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides