Question about LG 37LP1D 37 in. LCD Television

1 Answer

LCD LG 37" BLINKS 3 TIEMS AND GOES OFF

MY LCD SOMETIMES AFTER JUST SOME MINUTES OF USE THE SCREEN BLINKS 3 TIMES AND THE TV GOES OFF. THIS HAPPENS SOMETIMES 2 OR 3 TIMES A DAY OR ONCE A WEEK. HOPE THERE ARE SME SOLUTIONS. THANKS.

Posted by on

  • 2 more comments 
  • jacko79 Sep 12, 2007

    thanks alot, so that means I have a problem with the electric instalation of my home??? after having the set serviced if i dont fix that instalation will the problem be back??

  • Nbboy7 Nov 19, 2007

    Same problem

  • MMS2500 Feb 08, 2008

    I am having the same problem. After having a TV tech come out to service the set, he is going to have to get a new power board.

    My TV will go off. I have to completely unplug it and wait for about 30 minutes before I plug it back in.

    The service tech suggested I get a "clean power" surge protector, which apparently keeps a steady follow of power from both power and (possibly) cable as to not make the overcurrent curcuit shut the set off.

  • jessica237 May 11, 2010

    did it get solved when they came out and reapled? who fixed it for you?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,139 Answers

The overcurrent circuit is working as it should. You will have to have this set serviced by a qualified techniciam.

Posted on Sep 09, 2007

  • Henry McKelvey
    Henry McKelvey Sep 12, 2007

    No that's not what I meant the overcurrent protection circuit protects from over current in the TV itself. Sometimes the components in the TV begin to go bad and as a result they begin to draw more current and damage other components. The overcurrent circuit senses this current and shuts the set down to prevent the set form being further damaged, by the excessive current form the soon to be bad component.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG 37LC7D HDTV just went blank. Screen blacked out and green light is on but no response to input change, remote, volume, or channel change. I've unplugged it for several minutes in an effort to reboot...


My lg 37lc7d is having the same problem. My backlight is on but no display. Also the standby light blinks several times then the screen goes on but it's just all black. No a/v

Feb 08, 2011 | LG 37LC7D 37 in. LCD HDTV

3 Answers

47LG70 - PICTURE WENT OUT. STILL HAVE SOUND. HEARD A POPPING NOISE WHEN PICTURE WENT. TV IS ONLY 1 1/2 YEARS OLD. ANY IDEAS WHAT MAY OF HAPPENED.


I have had the same problem off and on with my 47LG70 for months. When the "popping" noise happens, the blue light in the corner stays on, so I know the tv is still on (sometimes I still have sound, sometimes I don't). Sometimes the screen goes black, but other times it is blue. If I turn the tv off then on again, it might stay on for seconds, minutes or hours. It's been very frustrating.

This seemed to happen right after I got my new Comcast box, which came with an HDMI 1.3 cable. I read somewhere online that this tv might not be compatible with that cable, so I unplugged it and am using component cables again. I just did this today, so I don't know if it will work, but so far the tv has been on for 30 minutes with no problems.

I'm pretty ignorant about HDMI compared to component cables. I imagine I will not get as good a picture with the component cables, but I am willing to sacrifice quality if I can just get the darn thing to work. Mine is also only 18 months old.

Hope this helps. If it doesn't, maybe someone else out there can help us both.

Sep 21, 2010 | LG 47LG70 42 in. LCD TV

2 Answers

I have an LG 42" LCD tv with blurred image on half the screen


lg 42 in lcd tv power button blinks nine times before staying on and has sound but no picture

Feb 04, 2010 | LG 42LC2D 42 in. LCD HDTV

2 Answers

Syntax Olevia flat screen tv video goes off then on


Hi, Replace the bulging capasitors on the main power supply board. Thanks.

Sep 22, 2009 | Insignia 37" LCD Flat-Panel HDTV

1 Answer

LG 52SX4D turns off randomly.


My Lg 52"tv turn off and on

Apr 29, 2009 | Televison & Video

3 Answers

LG 37LF65 LCD TV BLINKS 3 GREEN THEN 1 RED THEN TURNS OFF.


Here's a link to the service manual for a slightly larger LG LCD TV. Perhaps it may be of some help? The troubleshooting section appears to be the same for many models of LG TVs...

http://www.observations.biz/MANUALS/LG_LCDTV/42LF66.pdf

Mar 12, 2009 | LG 37LC7D 37 in. LCD HDTV

2 Answers

Lg lcd 37 inch tv loosing sound


i have the same problem and find that if i freeze then unfreeze the screen it works

Jan 31, 2008 | LG 42LC2D 42 in. LCD HDTV

Not finding what you are looking for?
LG 37LP1D 37 in. LCD Television Logo

Related Topics:

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

75157 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...