Question about Broksonic SC20145 20 in. TV/VCR/DVD Combo

1 Answer

Remote Control Stopped working

The TV turns on but the remote control stopped working. So, I bought an exact replacment remote and it also does not work. I don't have the manual for the TV. Do I need to program the TV or the remote? How do I do that? If not, what is the problem?

Posted by on

  • 4 more comments 
  • Anonymous Dec 01, 2007

    Samsung DVD Remote suddenly stopped working while trying to find Universal Remote Code. Is a button sequence to reprogram the unit??

  • AlexMatik Jan 04, 2008

    I wish I had the solutions. My Samsung remote was programmed to operate the Samsung TV, Samsung DVD, Panasonic VCR, and Scientific Atlantia Cable box and they all worked fine for 8 months. Then one day it stopped working for the non-Samsung devices. I got a new replacement Remote Control and it also did not work on the non-samsung devices. Of course I programmmed all of the various manufactureres codes but nothing worked.

  • Anonymous Apr 22, 2008

    I have an RCA TV remote that stopped working. I replaced the batteries, but still doesn't change channels or adjust volume. What do I need to do?

  • Chris Apr 30, 2008

    We have the same problem with a Panasonic TV. We have two identical Pansonic remotes for it that used to work and now neither one does.

  • gccntkz7 Jul 10, 2008

    I have the same problem with mine. I bought a replacement remote also, and like you all it doesn't work either. Now, my channels either switch to another language or the radio on their own, and it's really frustrating trying to watch my shows and it switch languages on me!!! How can I fix this? Universal remotes don't work either!!!!!!

  • Anonymous Mar 25, 2009

    I have the same problem. My LG plasma tv's remote stopped working all of a sudden too. I read somewhere that if you point your remote to any camera and press any buttons on the remote you should be able to see the infrared light in the camera. If you don't see anything then its your remote its dead. But if you do see the red light then somethings wrong with the tv.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

We have the same problem with remote controls for a Panasonic TV - we have two identical Panasonic remotes that both worked, but now neither one does. Any ideas out there? Thanks.

Posted on Apr 30, 2008

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: remote control not working and need programming code for cable television/universal remote control

you can get one at

http://remotes.com/


LTD1510
MALATA

Posted on Dec 13, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My original RM-C1502-1C remote [gradually] stopped working. Bought a new one. This worked perfectly for 1 day then stopped working except randomly/intermittently.


Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing each button on it at a time; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.

May 25, 2015 | Televison & Video

1 Answer

Why has my JMB TV stopped responding to the remote control?


Check the remote control for its infrared emission. Check it with fresh batteries. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience.
http://electronicshelponline.blogspot.com/

Aug 18, 2014 | Televison & Video

1 Answer

RC-261 fails to turn on/off Insignia TV. Remote stopped working (batteries good)


Check the battery contacts inside its battery compartment for any rust or dust accumulated. Clean them well. If this too do not help you, check the remote control for its infrared emission. In some cases, cleaning the remote control may be necessary. If you wish to get more details about how to check, repair and clean a remote control, visit this site. Pull up older posts. One among the post has details.

Mar 24, 2013 | Insignia RC-261

1 Answer

Samsung LE32C450E1W TV remote control stopped working, changed batteries no luck, turned off at power source for 30 min which fixed prob temp but has happened again and now turn off doesn't help....


Check the remote control for its infrared emission. Check it with fresh batteries. Clean the battery contacts inside its battery compartment. If these do not help you, you remote control need cleaning. If you wish to know more about how to clean and repair a remote control check this site. Pull up older posts. One among it has details.

Mar 24, 2013 | Samsung TV Remote Control

3 Answers

I have a Grundig GU22DVD TV/DVD combo and the remote has stopped working even with new batteries. We,ve just moved it to a new house and need to tune in the digital channels without the remote. Is this...


Take out the battery an hour,put in back in,have the same problems.The remote is dead.Try website like Remotes.com to buy an exact remote.Yes,u can use the manual control buttons on right side of the tv,but a little hard.

Sep 06, 2010 | Grundig GU19WDT 19 in. LCD TV

2 Answers

The remote control stopped working on my toshiba flat screen i changed the batteries and only the volume works with the remote still can't turn on/off or change channels


Make sure the mode switch is set correctly for the device (TV, Cable, Video recorder, etc) that you are trying to control.

Apr 28, 2010 | Toshiba CZ36V61 TV

1 Answer

My remote control I bought for my Sanyo TV stopped working I replaced the batteries and still did not work. I cannot find the code number to enter.


Please check & ensure the infrared is emiting from the remote control. Though we cant see this infrared beam with bare eyes, there is a trick to do so in http://www.unique-stuff.co.cc/fixing_remote_control_check_infrared.html Most of the problems is weakened infared beam. Replace the batteries when needed. Hope this fix the remote control problem.

Jan 21, 2010 | RCA Universal Remote Control

1 Answer

Need remote code for universal remote


Tries the Website 1-800- remotes Factory original buy an exact remote or might find ur codes there.

Aug 18, 2009 | Televison & Video

2 Answers

Remote control has stopped working.


your remote needs to be put back in TV mode. press the tv button or slide the switch to tv

Apr 07, 2009 | Samsung TV Remote Control

1 Answer

Toshiba rear projection tv


Will the tv power up with the power button on the TV control panel? If so its your remote sensor inside the TV. Let me know your model number.

Jan 21, 2008 | Televison & Video

Not finding what you are looking for?
Broksonic SC20145 20 in. TV/VCR/DVD Combo Logo

Related Topics:

2,789 people viewed this question

Ask a Question

Usually answered in minutes!

Top Broksonic Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75756 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Cindy Wells

Level 3 Expert

5521 Answers

Are you a Broksonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...