Question about Apex Digital HT-150 System

1 Answer

Help is it possible to also use my apex digital surround sound for just watching tv with surround , if so how do i hook it up to work that way ?

Posted by on

  • young51 Nov 29, 2008

    i can not get surround to work on onle tv



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 67 Answers

This is possible a number of ways. Depending on the type of TV you have, it may have audio out on the back of the TV. This will be two jacks that are RED and WHITE, and it should be labeled "TV OUT" or "OUT". Use an RCA audio cable and connect these two jacks to the TV jacks of the same colors on your surround sound unit. If your TV does NOT have audio out jacks, you can still accomplish this by use of a VCR. Just run your main TV input [coaxial cable from antenna or cable/dish] into the VCR, and then out to your TV as normal. Leave your TV on channel 3 [or 4, or whichever channel the VCR uses]. If you're using a regular antenna, you can switch channels on the VCR. If you're using cable, you should be able to just change channels on the cable box. This will give you surround sound from an older TV without audio outs. But most larger and newer TVs have an audio out jack on the back. Hope this helps!

Posted on Sep 07, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have this receiver hooked up to a Vizio LED tv and a Vizio Blue Ray using HDMI cables. The surround sound works from the speakers while watching a dvd (HDMI -1 connection) but I have no surround sound...

AV cables don't pass surround sound through, they are pretty much just left and right stereo. You need to turn pro logic on on the reciever to "pretend" to play surround. The better option of course would be to use a digital signal like another HDMI cable or digital optical audio from the cable box, if thats what your using.

Jun 16, 2011 | Yamaha RXV467 Receiver

1 Answer

How to hook up souround sound to tv

Hook up surround to you HI-fi, not the TV. Get the TV-related audio digitally, if possible, from whichever source you want to watch.

Jun 28, 2010 | Audio Players & Recorders

1 Answer

Connection a JBL surround cinema speakers with sub to a Yamaha

if you do not have the digital hook up from the tv to the reciever
304c659.gif then you will not get the subwoofer sounds or the dolby digital sounds
if you don't have this on your tv then just turn off the dolby digital when watching the tv , and you should be able to hear the subwoofer thru the virtual surround sound
hope this info is worth a fixya and if you need other help then just ask me and
i'll be glad to help


Nov 23, 2008 | Yamaha HTR-5850 Receiver

1 Answer

Hooking up my DVD/VHS player to TV & Convertor box

I would just hook up the dvd/vhs player with the red,white,yellow rca cables that should of come with your unit and just go to the input on the tv to watch your dvd/vhs player. This will give you a better picture and sound while allowing you not to have to watch dvd/vhs on a channel which helps make the dvd/vhs player independent. Also if possible I would hook the converter box up with the red,white, yellow rca cables to the tv as well if your tv has more than one set of red,white,yellow plugs since it is a better connection that coax and you probably watch more tv than vhs/dvd anyway. So bottom line try to hook up both boxes red,white,yellow and watch each box on different inputs instead of like channel 3 or 4. Also to record of converter box you can run coax from converter box to dvd/vhs combo and make sure your dvd/vhs player is on tuner input or channel 3.

Nov 16, 2008 | Insignia Digital-to-Analog Converter for...

5 Answers


i need to know how to hook up my home theater to my TV and Dvd.

Oct 04, 2008 | Durabrand HT-3915 System

2 Answers

Sony surround sound hookup

In short, the answer is: Hook up all three to each other. I have a Samsung DLP HDTV, and I was trying to hook up a Sony DAV-HDX500 home-theater system and a Comcast HD set-top box, but I found that the Sony user guide is helpful only for setting up the speakers. Most of what it had to say about HDMI and getting the TV sound or cable sound to go through the speaker system was wrong (or, at least, it didn't work for me). So, here's what I did. I connected Component video cables (Y/Pb/Pr out) from the Cable box to the TV (Y/Pb/Pr in), audio cables from the Cable box (audio out) to the Sony system ("SAT/Cable" audio in), and an HDMI cable from the Sony system (HDMI out) to the TV (HDMI in). This allows me to 1) watch DVDs with surround sound through the TV's HDMI source (when the "DVD" format is selected on the Sony system), 2) watch cable with surround sound through the TV's Component source (when the "SAT/Cable" format is selected on the Sony system), and 3) watch cable WITHOUT the surround sound, as I did before I ever had the Sony system. One item of note: When watching a non-HD channel with the surrond sound on, the audio is slightly out of synch with the video; thankfully, there's no such problem on HD channels. Anyway, I hope this helps. It drove me crazy for two days straight!

Dec 31, 2007 | Sony DAV-HDX500 System

1 Answer

Surround sound

Make sure the RCA cable is going from an audio OUT on TV or DirecTV box to a red/white (non-digital) audio IN on surround sound or home theater system.

Dec 29, 2007 | Insignia NS- 27" TV27 TV

3 Answers

SAMSUNG LE40R88BDX 40" LCD TV with DVD home Cinema system

if ur surround hasnt got digital in then it wont work also its better to use the red white and yellow wire, i have hdmi and them wires hooked up and i have sound through everythin all i have to do is put it on aux 2, try it out

Dec 02, 2007 | Samsung HT-X40 System

Not finding what you are looking for?
Apex Digital HT-150 System Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apex Digital Audio Players & Recorders Experts


Level 3 Expert

77932 Answers

Robert Rankin

Level 2 Expert

356 Answers


Level 3 Expert

3289 Answers

Are you an Apex Digital Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides