When the dial is placed on the box with arrow point. I turn the power on and press the menu button and if it does come up, then I arrow down to protect and it will give no choices. It just says protected. Then if you dial to P the LCD screen will show "no card" when the card is properly istalled and the manual lock is not engaged. There has been pictures taken with this card in, but it might jump and show protected card. Is there any hope or answer?
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has answered 200 questions.
An expert whose answer got voted for 20 times.
Re: Gateway DC-T50 digital camera 5.25 megapixels
Defective mechanism, a stucked mechanism is present. camcorder are smart it can detects error and shuts down itself for safety. earlier models dominoes the defect if the user is not quick enough to react when something goes wrong with the camera. you need professional service to fix it .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1. Close the lens barrier and press the LCD monitor ON/OFF button to turn on the LCD monitor. 2. Press the Menu button to display the Menu. • See page 37 for how to use the Menu. 3. Press the top/bottom arrows on the Jog dial to select MODE SETUP, then press the right arrow. 4. Select the date order using the top/bottom arrows on the Jog dial. Press the right arrow on the Jog dial to adjust the first setting month/day/year. 5. Press the top/bottom arrows on the Jog dial to adjust the first setting, then press the right arrow on the Jog dial to adjust the second setting. Repeat until the minute is adjusted. • 00 will appear for the year 2000. 6. Press the OK button to save the setting. Press again to cancel the Menu. • For accurate setting, press the OK button when the clock hits 00 seconds. • If the Menu button is pressed before the OK button, the setting and Menu mode will be canceled
Assuming the camera is working, with the camera off, rotate the mode dial so that the icon with the wrench lines up as the active mode. Then press the Power button and turn on the camera. Press the right arrow to select Custom Menu. Then press the down arrow to select Date and Time. Then press the OK button. Use the left and right arrows to select a part of the date to change and use the up arrow to increase the value and slide the zoom lever to down button to decrease the value.Press the OK button when the date and time (24 hour clock) is properly set.
There is an incompatibility between Fios and Vizio audio. To fix the problem, on the Fios box, press "Power" then "Select" then "Menu", one right after the other. This accesses a secret menu on the Fios box. Using the arrow keys on the front of your Fios box, arrow down to "Additional HDMI Settings" then press the right arrow. Another menu will appear (may take a few seconds). Arrow down to "Audio Out" and press the right arrow to change from "Auto" to "L-PCM". Press the Power button to exit the menu. This should solve your problem. Thanks to Vizio tech support for the answer.
Turn the dial to the settings menu.
Use the up/down arrow button to slide through the menu.
Go to where it says Format [ just below auto off ].
Now, it should be highlighted.
Perss the button below the up/down arrow button.
Note: it is labled in silver that says o.k.
Press it and another menu will pop up.
Exit and yes.
You must arrow down again to highlight yes.
Then press the button below the up/down arrow button, this is the o.k. button. Press it and it will format your camera.
Turn the dial to the settings menu. Use the up/down arrow button to slide through the menu. Go to where it says Format [ just below auto off ]. Now, it should be highlighted. Perss the button below the up/down arrow button. Note: it is labled in silver that says o.k. Press it and another menu will pop up. Exit and yes. You must arrow down again to highlight yes. Then press the button below the up/down arrow button, this is the o.k. button. Press it and it will format your camera.