Question about Hoover Nextra HNF 3167 Top Load Washer

3 Answers

Hoover750l At several times during a cycle the earth switch at the fuze box goes off. When I turn the fuze back on the machine continues for awhile

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Please help
My Hoover 750 L Top Loader leaves a lot of fluff when I wash my dark clothes. I have been looking for a filter on it but no success. Any one have an answer please.

Posted on Jan 24, 2008

  • skirkwood966
    skirkwood966 Jun 23, 2012

    I have the same problem in a body corporate situation and we have 3 of the machines....I cannot work out how the filter removes. Has anyone else?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Good day! The machine had a short circuit, fixed the wire that short circuited in the body, now the machine is running but no water comes in to the tub and the tub doesnt spin during spin dry cycle

Posted on Jul 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hoover 750 washing machines have a lint filter down the centre of the agitator. you simply pull it straight out and clean it.

Posted on Aug 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer stops during normal wash cycle for a minute or more, and then continues. Would replacing the timer fix it?


If it actually goes on and finishes the cycle and that really bothers you replace it. If not leave it alone and allow a little more time to complete its cycle. The lid switch only keeps the spin cycle from going with the top open.

May 23, 2014 | Whirlpool Washing Machines

1 Answer

During washing cycle E2 alert alarm


What is the make and model number of your unit?

Feb 18, 2013 | Washing Machines

2 Answers

Hotpoint Dishwasher BF1620 blew the main fuse circuit in fuse box during mid cycle wash? Re-set main power fuse circuit but now as soon as Dishwasher switched on immediately blows main kitchen power fuse...


This is happening because you have a very bad fault, a Phase to Earth short, problem. Leave machine UNPLUGGED, Breaker/Fuses OUT. do NOT use it, nor Touch it, It is possible to get severe electric shock. PLEASE get a registered serviceman to inspect this unit.

Feb 07, 2010 | Hotpoint 23 in. BFI62 Built-in Dishwasher

1 Answer

My Bosch WFL 1220 MAXX F/L washing machine stops during a cycle


The diagnostics are finding a proble. Usually a time out on the fill or empty. Check water supply is clear and that the drain filter is clean

Dec 08, 2009 | Washing Machines

1 Answer

Need to reset washer it is stuck in mid cycle and wont continue nor start over


doesnt this model have the cancel button by the start button.......if so........switch on then hold cancel for 10 seconds...........

cheers

Jul 24, 2017 | GE WBVH6240F Front Load Washer

1 Answer

Whirlpool LGR7648KQ1 top loader washer


Hi It appears that- You have a clogged water pump inlet filter. Normally located at the bottom of the machine there should be a 1"-2" disk that you need to rotate half turn to release. Be aware that a large quantity of water is likely to drain when you open it. Good luck

Sep 07, 2007 | Washing Machines

1 Answer

Washer keeps stopping during any cycle


the humming noise could be from two sources and it is worth while doing a few simple checks first the drain pump is jammed with a foreign object. check nothing caught in the impellor second water not available - check taps turned on. also turn water off, undo fill hoses, put in a bucket and turn water back on try on drain or spin programs to check water drainage as well

Jun 19, 2007 | Tecnik TKL9260 Front Load Washer

2 Answers

Washing machine blown fuses


Hi - had a similar problem with about 3 different makes of washing machine - the RCD switch on the main household fuse box was continually tripping . Nobody could give me a right answer . Eventually ended up with a Hotpoint . Felt sorry for the delivery guys from the electrical retailers having to keep dragging machines in and out .

May 07, 2007 | Indesit WA 115 Front Load Washer

Not finding what you are looking for?
Hoover Nextra HNF 3167 Top Load Washer Logo

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Hoover Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...