In the two ports with the screws, I cannot get the piston to go up. I though I had replaced the springs and ball bearings in the proper order in the two side ports, but I cannot get the piston to rise. All O-rings, washers and springs have been replaced. Any suggestions.
G'day, I recently bought a DD130 which I have now discovered has a slipping clutch. I have since...
(More)
G'day, I recently bought a DD130 which I have now discovered has a slipping clutch. I have since replaced a few worn shims but I need to know what lube and how much to run in the gearbox. Cheers Wayne
I have bought a Hitachi Cordless Driver Drill and am going to register. I was asked for the serial...
(More)
I have bought a Hitachi Cordless Driver Drill and am going to register. I was asked for the serial number. I looked everywhere at the box, the tool itself and the manual but couldn't find it. please show me where I can find it, Thank you.
Cordless drill M# 6337D leaf spring has come out of houseing while replaceing the trigger switch....
(More)
Cordless drill M# 6337D leaf spring has come out of houseing while replaceing the trigger switch. How is it put back into place?
After retuning tv's successfully,on different nights afterwards,Some chanels disappear again and...
(More)
After retuning tv's successfully,on different nights afterwards,Some chanels disappear again and retuning has to be done yet again.This has happened several times.I have a new digital aerial.Thank you in advance.