Question about Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television

1 Answer

I need to replace a broken screen on my sony kf 50we610

I was given a sony lcd projection tv for my brother as he broke the screen and mirror. I have the parts but don't know what order and which direction the screens should go (there are two of them). One (the lenticular) has a black coating on it, the other (the fresnel) is just cloudy. which one is first and which direction should the black coating face?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers
Re: I need to replace a broken screen on my sony kf...

Hi drdoolittle,

Some screens have labels, so place them so the labels are upright and tward the front of the TV.

The outside screen is the lenticular screen. The black vertical lined side is outside. The fresnel screen has very fine circular lines in it. You can find them by feeling them. This goes against the lenticular back side of the screen. the fesnel has a flat side that is the back. It will be tward the mirror. If the mirror has two shiny sides, then it should be placed with the mirror side out. You can tell this by placing your finger tip on the mirror. If the finger nail meets a fingernail, then this is the mirrored side. Install this side tward the front.

Try to keep dust from between the screens. Check by looking through the screens before you put the in the frame. Then check them again after you put them in the frame.

Wear latex gloves to keep finger prints away.

Clean back of screen assembly and install the screen on the TV.

You can now watch the TV.

Cheers, CrazyLee

Posted on Nov 03, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I need LAMP DOOR Cover Mine got warpped from heat

Contact someone from sony, call or send them an email asking where you could purchase this replacement panel.

Jan 27, 2015 | Sony Replacement lamp for Grand WEGA or...

1 Answer

Sony LCD Model KF-60WE610 lamp was replaced and then it shortly after stopped turning on. Blinks Green 6 times then Red 6 times Please help!

For Sony Model KF-60WE610, KF-50WE610, and KF-42WE610, the Diagnostic Code of power light indicator flashing 6 times green, then flashing 6 times red (6 red etc), means you need to replace part number A-1302-272A G1 BOARD, COMPLETE. See Sony Service Manual, 4. Chasis-1 at part Ref no. 103. The Power Board sits vertically in two slots on the left side of the electronics board. 4 wire connectors to remove when replacing. This component fits all 3 KF models listed above.

Jun 22, 2011 | Sony Grand WEGA KF60WE610 60" Rear...

2 Answers

Sony LCD KF-50WE610 no picture-red light blinking

3 times standby red light blinking shows that lamp cover has not been placed back properly after lamp replacement.
Make sure lamp cover, (the first thing that you removed to replace lamp in tv) is fixed securely then turn tv On.

Jul 30, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Dim and reddish picture SONY lcd kf-50we610

Light Engine/optical block
Encompass Parts Distrubtion 1-800-638-3328

Apr 14, 2010 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Is the sony tv kf-50we610 is a slim panel from the back?

Your TV is a LCD projection TV. It does not have a panel, it uses a optical block in order to project the image onto a mirror and to the screen of the TV.

Nov 12, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

Blue hue accross bottom of screen - Sony KF-50WE610

You can try doing this, turn on the Tv and select the service menu, if that tint also shows on the menu, it's most probable to be your DMD board, but if it doesn't it might be the video board..

Jul 03, 2009 | Sony Projection Televisions

1 Answer

Sony Grand WEGA KF-50WE610 LED blinks 4 times

4 times blink shows Temp Error and requires temperature sensor replacement in Sony KF-50WE610 TV

May 21, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

SONY GRAND WEGA KF-50WE610 can't turn on TV screen.

Ths 5 blinks usually indicate an AKB problem. There is a break in the video path. I'll look up your specific model and post the results here. Please update this if you wish to attempt the repair yourself.


Mar 19, 2009 | Sony Grand WEGA KDF-55WF655 36" Rear...

Not finding what you are looking for?
Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Projection Televisions Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers


Level 2 Expert

103 Answers

Jason Harris
Jason Harris

Level 2 Expert

256 Answers

Are you a Sony Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides