Question about Husqvarna Freesia 425

1 Answer

Walking foot for my machine

I just received a walking foot for my husqvarna freesia machine without instructions. Does anyone has instructions for this #4123573-01. Thank you.

Posted by on

  • m11c10e6 Dec 14, 2007

    The walking foot I received from the dealer ( 4123573-01) is thicker than my 1/4 inch foot so the screw to attach it to the shaft is not long enough. Do I have to order a separate screw?

  • BJ sewing Feb 15, 2013

    Yes

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Husqvarna Expert
  • 371 Answers

If you still need assist, suggest you visit an authorized Husqvarna Viking dealer for assistance. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Posted on Feb 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you thread the 425 husqvarna viking machine?


Perhaps this will help (page 9):

Be sure to ALWAYS RAISE the presser foot when threading the top thread!

Viking Freesia 415 User Manual

May 16, 2018 | Husqvarna Sewing Machines

1 Answer

Huskvarna 415 walking foot repair


Are you talking about an "easy feed" attachment for a home machine? (it's not really a walking foot btw) If so just buy a new one for your length of shank on the Husky.

Nov 17, 2012 | Husqvarna Freesia 415

1 Answer

Can you sew leather or vinyl on Husqvarna 415? If so, what tension, needle and foot should I use?


Ok. Depending on the thickness... garment weight leathers can be sewn with a domestic machine... Most often an even feed foot (the home version of a walking foot) is needed. You will likely need a larger leather needle and somewhat longer stitches than you would normally sew.

As for stitches looking messy on the back that is a top tension problem... you'll need to tighten the tension until that goes away. AFTER you have made sure you have your machine threaded correctly with the presser foot in the up position.

Aug 19, 2012 | Husqvarna Freesia 415

2 Answers

I am trying to figure out if I have a zipper foot for my Husqvarna Freesia 415 sewing machine. They are labled by letter and I have A B C D E and J.


A quick check of a random Husky owner's manual cross references the letter to a part number in the appendix. Alternatively call Husky and get the info.

Jun 03, 2011 | Husqvarna Freesia 415

1 Answer

Need instructions for putting a walking foot together


http://www.husqvarnaviking.com/us/2821_3079.htm
This is a link to husqvarna site for help..Hope this can help you. Wayne

Mar 13, 2010 | Husqvarna Viking 1

2 Answers

I own a freesia 425 & I bought a gathering foot. How do I use it? Where do I put the settings?


not knowing whether you have a Viking foot, I'm not sure how to advise you. Suggest you visit an authorized husqvarna viking dealer for assistance. They are usually eager to help. You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com

Good luck.

Oct 22, 2009 | Husqvarna Freesia 425

1 Answer

No tension on bobbin thread


You might remove the bobbin assembly looking for a broken tension spring (maybe a piece of it lying in the bottom the bobbin case.

Jul 19, 2009 | Husqvarna Freesia 425

2 Answers

Foot pedal dead, machine keeps sewing!


There is no suppressor in the foot control of a 425. Only the control unit, which may need to be replaced. If the machine accelerates to full speed, it may have a problem with the "stop right" board which tells the machine whether to stop with the needle up.
You could have several problems, so go see a qualified Husqvarna repairman. You may contact Husqvarna customer service to locate the best one in your area.

Mar 12, 2008 | Husqvarna Freesia 425

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

318 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...