At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I have an emerson tv and I want to get it to the line...
Go through the channels and see if you can get there that way (below channel 2). If not, consider a One For All universal remote, the TV/VIDEO button changes it to auxillary.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have a remote, the channel is usually labeled "A/V" or "Video". If you don't have the remote, you might need to purchase a universal remote and use that to get on the video mode. Sometimes you can just go down further than channel 2 and it will show the A/V channels.
I found it on ebay...http://cgi.ebay.com/EMERSON-NE616UE-TV-REMOTE-CONTROL-CR202EM9-ORIGINAL-/380285683747?pt=LH_DefaultDomain_0&hash=item588acb0823#ht_1223wt_936
Tries pushes the channel up button few times,will get u into the video modes 1 or 2 in most of 90 to 202 CRT(tubue tvs).Or try website like Remotes.com to buy an original remote.
you will have to use component cables with rca's
from xbox plug to rca to plasmas component input
use your plasmas remote to locate a channel to tune int channel o your xbox,when you turn on xbox the start screen should show,dont need a disk for tuning just playing
Sometimes its tricky with those buttons on the front but with most tv's you can get to the menu and change inputs.
One you figure that out you will want to go back in and add that input as a channel in the add/remove channel section then you will be able to get to that input by just changing the channel down below 2
( another way to do this would be to run the auto program with the devices on and see if it adds them that way)
In many cases by connecting the DVD via a scart cable (depending in what country you live in if your system supports it)
the dvd will send a signal to the TV to switch over to RGB mode when you start playing the dvd. Rember to make sure the scart connectors are firmly pressed into their sockets on both tv and dvd.
Also if you found out how to switch channels directly on the TV try to go through them ...you might find the AV channel that will show the picture from your dvd.
×