Question about Sanyo AVM-3659S 36" TV

1 Answer

Connecting x box

Trying to connect xbox but have no remote

Posted by on

1 Answer

Re: connecting x box

Go to the menu screen you can change the input without the remote.

Posted on Mar 05, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Xbox universal remotes

The remote control you specified here have no setup codes to Xbox. If you wish to get a universal remote control, which will work with Xbox, you have to know whether the remote control you are going to buy, have setup codes to Xbox.
If you wish to get more details about this, check these links. It has setup code list, and setup proceedings to many popular brand remote controls. Brand name of the remote control isn't a matter, but its code list should have setup codes to Xbox. Check the linked sites with patience, and choose one brand remote control, according to availability.
Pull up previous posts by its left sidebar, or type in the brand name and model number to of your set, to its search box, and press 'Enter' or view it in Mosaic / Timeslide option.

Oct 03, 2013 | Sylvania Standard (CRT) Televisions

1 Answer

Connect xbox tv


Jun 19, 2013 | Bush Standard (CRT) Televisions

1 Answer

How to connect xbox to jvc av-28gt1sjf

I assume that since you do not have remote you cannot choose another AV channel on your TV. If so you can use the RF input using a RF converter to AUDIO /VIDEO or if not the sky input must be shared through a VCR/DVD or multimedia/DTS amplifier

Nov 30, 2011 | JVC AV-28GT1B 28" TV

1 Answer

Model # 31gt740 / do not have audio on several channels. the other channels function normally. this happened after my grandson hooked his XBOX up to it and then we switched back to regular tv.

Hello there,

Press the SOUND key on your GE remote (below and to the left of the arrow keys) to open the AUDIO PROCESSOR menu then use the arrow keys to select STEREO then press OK. It's possible that connecting the X-Box has switched the TV to an audio mode which is not compatible with the audio signal on some channels.

If this doesn't work, try some of the other settings (MONO / EXPANDED, etc) from the AUDIO PROCESSOR menu.

In addition, if you are using a cable/satellite receiver, please try resetting the receiver. On most boxes you can do this by simply switching off and back on. Some may need to be disconnected from the power for a few seconds.

Hope this helps. Please try the suggestions above then let me know if you need further assistance by clicking on "Add a Comment" below your question. Please note, when connecting or disconnecting devices from the TV, it is always better to do this with the TV switched off.


Mar 20, 2011 | GE Standard (CRT) Televisions

1 Answer

Video does not work I have an hdtv with comcast cable When I try to program I can not get the xbox 360 to wrk

When you try to program what??? usually you connect the XBOX OUTPUT to the same INPUT on the TV (RF ch 4 or 3), (RCA) yellow, white, red connectors or the RGB connectors, and for some newer 360 boxes you have the HDMI connector, it has nothing to do with the COMCAST CABLE unit... it is just a matter of having the correct cable/connections and the correct input set on the TV...

Good luck!

Feb 28, 2011 | Broksonic Standard (CRT) Televisions

1 Answer

Im not sure how to hook the converter box up to it

For a digital to analog converter box, connect your antenna cable to the converter box. Then pick your output connection. Either set the TV to channel 3 or 4 and connect the coax out from the converter to the TV or connect the composite video (AV) to one of the A/V inputs on the TV (change the TV source to the appropriate input). The source is changed with the remote (TV/Video button).

If you have other devices like a VCR in the connection sequence, you could connect the converter box to the VCR (and record on channel 3 or 4) and then connect the VCR to the TV as above. You will be limited to recording and watching the same program unless you get another converter box or tuner.

Programming the remote will depend on the box. For other set top boxes, the connections will be very similar.

I hope this helps.

Cindy Wells

Feb 17, 2011 | Sony KV-32FS10 32" TV

1 Answer

How to setup Toshiba CT824 tv with digibox (I have no user manual)


You can connect the digibox (digital converter box) or DTA to the TV using coax jumpers and tuning the TV set to channel 3 or 4 in some cases.

Connect the input (wire from the wall or floor) to the input on the digital box.

Connect the output of the digital box to the input of the TV set.

Turn on TV and digital box, tune TV to channel 3 using the TV remote or the buttons on the TV itself.

Use the digital box remote to change channels. You may need a code to program the remote to work the TV set.

I hope this helped.

Apr 27, 2010 | Standard (CRT) Televisions

1 Answer

No picture on tv

Hi, try to change the input selectection [like input 1 or 2 until you get tv mode whit the remote make sure erverything is connect to the right place/////

hope that will help it should??

Apr 07, 2010 | Philips 20PT6441 20" TV

1 Answer

Tried to connect original xbox to video 1 but no

Replacement of remote control battery solved problems.

Jan 06, 2010 | RCA 27V530T 27" TV

Not finding what you are looking for?
Sanyo AVM-3659S 36" TV Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66372 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides