Question about Samsung SCX-4100 All-In-One Laser Printer

1 Answer

Scan and print problem

When I scan, the image overlaps on the other half of the page. There are some light and darker lines across the page

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 or more questions within one hour.

  • Samsung Expert
  • 166 Answers
Re: scan and print problem


Posted on Oct 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Printing too light

For understand the issue, little bit technical knowledge required: Take half test page, check how much dark image formed on paper, check on cartridge drum how much dark image created?..(half test page: while printing half of the page switch off the printer, take cartridge out as well as take half printed page)If half page print quality is good on paper: Fuser faulty(teflon sleeve)If half test page print not good & image on drum is OK: Fault with Transfer roller or its bios voltage contacts..If there is proper image on paper & image drum: Problem with laser scanner assembly..find the problem, then remedy is easy..

Feb 02, 2012 | HP LaserJet 3030 All-In-One Printer

1 Answer

HP LaserJet M5025 MFP scans too light. Under default job options, image adjustment, darkness set to 3. The printer was sent to us upside down. We recently installed a brand new cartridge. Any suggestions?

If you print the configuration pages from the administration>information menu and they look dark then you know that the printing system is working fine. If they are light as well, then it is possible that being shipped upside down resulted in some dirt getting into the laser scanner. The image original settings are kind of wonky, in that it is backwards to normal assumptions. Darkness refers to the actual orignal you are scanning, so in most cases if you have lighter origjnals then you need to set darkness lower. As well, check whether the image type is set for photo or text. Setting for text will result in darker scans.

Jun 18, 2011 | HP LaserJet M5025 MFP Printer

1 Answer

Konika Minolta Copier prints half dark pages

If it is only causing an image problem when you copy and not when you print, then there is something wrong with the optics under the glass. Check and see if you have any mirrors out of place or if the scanner looks crooked. If you have the machine set up to scan try and scan to SMB or email to see if it still has the problem. If everything looks correct under the glass and scans to SMB and email look bad like the copies, you may have a bad CCD assembly, or a bad board.

May 10, 2010 | Konica Minolta Printers & Copiers

1 Answer

Printer name :hp Laser jet 1300 the print

this printer prints a multipage document on 1 page everytime

Oct 21, 2009 | HP LaserJet 1300 Printer

3 Answers

My HP printer 2420 leaves "ghost" prints on the pages.

This can be caused by one of two things.

1. faulty wiper blade on your toner so that the previous image in not being wiped off the drum.
2. worn fuser sleve.

To work out which it is you will need to do a half stop test: print off a normal document then when it is about half way through the printer ( unfortunatly you may have to repeat this to get the timing right) open the front cover. remove the toner cartridge. if you can see the ghosting on the page the it is the toner. if its not there then its a new fuser. to save on money and if your confident enouh you may be able to just chane the fuser sleve depending on the state of the fuser on a whole.

hope this helps
feel free to email me if you have any other questions:

Oct 21, 2008 | HP LaserJet 2420 Printer

2 Answers

Dark Blurry Ink Line

When I print darker color images I get what I call Zebra stripes across the picture on a slant about 1/2 inch apart. Changed the toner and the drums are at 45% capacity. Any suggestions. Thank you.

Sep 03, 2008 | Konica Minolta magicolor 7450 Laser...

2 Answers

Oki c3200

Try cleaning the black bars on the bottom of the top cover. These are the LED's, which put the image on the drums.

Jul 18, 2008 | OKI C3200n Led Printer

1 Answer

Right half of A4 has not print correctly

How old is the printer? try to go to the print options and do a realignment of the print heads. if its an old printer possible might need to clean the print head if that didnt work maybe bad print head.... take it to the pro. good luck!

Mar 21, 2008 | Canon BJC S300 InkJet Printer

2 Answers

White line across printed page

Hi Alms, Is there any chance you can post a scan of one of your faulty pages. This would help to assess the fault. If you print several pages, does the image move further and further down the page with each copy? Is the white band repeated down the page? If so measure the distance between each band - this will help identify the faulty component.

May 21, 2007 | Minolta magicolor 2200 DeskLaser Printer

Not finding what you are looking for?
Samsung SCX-4100 All-In-One Laser Printer Logo

219 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts


Level 1 Expert

185 Answers


Level 2 Expert

166 Answers

 Mike M
Mike M

Level 3 Expert

3320 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides