Question about Sansui DTV2760 27" TV

4 Answers

No sound on two stations

The sound on two stations (ABC and NBC) are not working and on one I am receiving a weather radio channel. I called the cable company and they said the problem is with the SAP on the television. I have tried everything I know on the remote to reset, but cannot find SAP on the remote anywhere. 1. Does the tv have SAP capabilities? 2. If so, how do I get to it? 3. If not, what else might be wrong with the sound?

Posted by on

  • Anonymous Apr 04, 2008

    I bought a Sansui tv in Dec 07 and the sound has become distorted on several channels. I have 2 other tv's in the house and the sound is crystal clear. Should I take the tv back to Sears for an exchange? I don't know how to resolve the problem myself. Thankyou

×

Ad

4 Answers

SAP is often not called SAP or Second Audio Programing. What you want to change is the audio selection on your television. I don't have a Samsung TV, I have a JVC but the SAP is called just audio and then you select the options. Look for a menu selection other than SAP. If this problem does happens on all the major channels NBC, CBS, and ABC this probably isn't your problem.

Posted on Oct 11, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 52 Answers

If you don't hava a sap button, look for a mts button

Posted on Feb 10, 2008

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

Good day pare! guly ilan kaya tayo pilipino dito!? pare magkano na ang kita mo dito sa site? ako may 47$ na pero di ko pa natangap!

Posted on Oct 02, 2007

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 67 Answers

The best thing to do fine tune manualy

Posted on Sep 29, 2007

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Shuttle83
  • 1139 Answers

SOURCE: Sound isn't working correctly

Hello dotdeb99, Use your remote to go to the menu on your TV and scroll through the menu items, you should see the SAP feature. Then turn it off. You can also get the users manual for your TV on-line and it should have SAP instructions in it. Just remember SAP is a TV menu item, it will not be actually on the remote itself. Thank you.

Posted on Sep 05, 2007

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a palsonic TFTV826HD tv and when i came home from a 2 week holiday , i am not able to receive the ABC and ch 10 stations , others i have , i reset and did the auto tuning


Do you use an digital antenna receiver which gives you a couple basic air channels for free Or is it through a cable company? It could be the weather conditions or the antenna could be unplugged or cable wire could be loose or cable company could have certain channels being fixed.
. We have a big Element HD tv flat screen and use an digital antenna receiver and when receiver is unplugged or if our outside/entry way doors are open (receiver antenna is outside) none or some of channels won't work..
Hope this kinda helps :/ :) let me know.at least I tried lol

Feb 01, 2017 | Televison & Video

2 Answers

We are unable to receive radio stations on our recently purchase lcd26advd, is this tv set up or how it should be. The instruction manual makes no mention of radio stations.


Digital TVs or set-top boxes only receive the digital TV signals not the digital radio signals. To receive digital radio, you need a digital radio (DAB+) receiver. The ABC does broadcast two of its digital radio music stations-ABC Dig Music and ABC Jazz-on digital TV and they are available on channels 200 and 201.
If this is helpful a vote of the thumbs up would be appreciated

May 02, 2011 | Televison & Video

1 Answer

I have a CRAIG 13 INCH HIGH DEFINITION LCD TV MODEL #CLC503 I PURCAHSED AT CVS / PHARMACY I GET CBS AND ABC STATIONS GREAT BUT I CANT GET NBC??????? PLEASE ADVISE OF THIS ISSUE


NBC antena broadcasting signal is weak and it sit in pretty low ranges on the mountains tops call mountain Wilson.The broadcasting antena is weak and ur receiving antena is weak too.Tries websites like Amazon.com Ebay.com to buy a Digital antena and used it,will boot up ur tv antena receiving signal stronger and longer ranges.Than.U will able to get the NBC tv channel.

Dec 03, 2010 | Televison & Video

1 Answer

Cobra 75 wx st everything seems to work eccept receiving signal meter will spike on trx and it seems to receive but no sound there is sound in wx mode


WX is for weather. If you put it on WX, and you do not hear anything, then you need to change the weather station it is on. in wx mode, you change weather channels by pressing channel up and down. To communicate with 2 way, press the cb/wx button so it is on CB mode.

Sep 28, 2009 | Cobra 75 WX ST 40-Channels Handheld CB...

1 Answer

I have a 13' Orion tv, model #TV1326BW with rabbit ear antenna. I have connected everything correctly to the converter box for digital signals. I can pick up all stations except the local CBS affliciate....


I have the same TV & cannot get into the TV menu to program the cable... it was bought secondhand without the original remote. There are no buttons anywhere on the TV itself to bring up the menu & the universal remote's menu option doesn't do it, either... how do I set the channels?

Aug 04, 2009 | Televison & Video

2 Answers

Cannot get local channels back after dropping cable.


Are you positive that your city has not done the Digital Conversion? Some Cities are doing it early before the February deadline. Also make sure you are tuning in to the correct channels. Meaning that if on your Cable Provider ABC was on Channel 3 that does not mean that ABC with still be on Channel 3 after you have your Cable turned off. Most of the Time the Local Stations Tag will let you know what channel its on. It will be something like "KWAS ABC 27" So on your TV you would Tune it to channel 27 to get ABC and the same fore NBC , FOX, CBS , etc...
I hope this helps Take Care =)

Dec 07, 2008 | Televison & Video

1 Answer

37" LG 1080p


Hi ks0412,

If you are receiving a High-Definition (HDTV) signal through an over-the-air broadcast, you may see this kind of mosaic-like breakup of the picture and sound if the signal is weak or interrupted. This is the same way that you would receive snow and static with an analog signal in the past. I would suggest readjusting your antenna for better reception on the channels that are giving you trouble.

If you are receiving this broken signal from a subscription-based service such as cable or satellite, I would recommend contacting your service provider for assistance. It could be a problem with the signal, your equipment, or the equipment setup.

Thank you,
Jason,
Go Ahead. Use Us.

Jun 21, 2008 | Televison & Video

4 Answers

I purchased a SANYO-DP46848 42"HDTV. I have a Cable box and my cable provider (Time Warner Cable) provides free HD Channels. However.... I CANNOT PICKUP ANY HD CHANNELS ON THE NEW TV. WHY???...


I just got the same exact one, when it searches automatically the first time it doesn't look for digital channels. go to Menu>manual channel search>cable. it will look for all possible signals and will take forever probably. the free digital channels will take several seconds to switch channel to channel, but they're there! They will show up on your screen as "DC 91-2" or similar. you can switch back to regular cable channels with the input button, you just cycle through all the inputs. hope that helps.

May 18, 2008 | Televison & Video

1 Answer

Direct TV DVR Recording Problem


call tech support & ask them to hit your box to reset it, in the meanwhile unplug it for 15 seconds

Apr 22, 2008 | Directv (R10) DTV Receiver / 70-Hours...

1 Answer

Sound isn't working correctly


Hello dotdeb99, Use your remote to go to the menu on your TV and scroll through the menu items, you should see the SAP feature. Then turn it off. You can also get the users manual for your TV on-line and it should have SAP instructions in it. Just remember SAP is a TV menu item, it will not be actually on the remote itself. Thank you.

Sep 05, 2007 | Sansui DTV2760 27" TV

Not finding what you are looking for?
Sansui DTV2760 27" TV Logo

375 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sansui Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75404 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sansui Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...