- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To solve we need to determine if its the charger, the battery or the actual device. To do this first thing you need to do is try a different charger, if the phone still dosent work then you need to try a new battery, if the phone still dosent work with a new battery the problem is with the phone. If its a charger or battery problem you will need to purchase a new one. If its a phone see if you can go ahead and do a warranty exchange with your service provider, such as T-Mobile.
Hope this helps,
The key is "as soon as the phone rings". Who's ringing it? I had one of those on Packet8. I had to go to their website and get the instructions to change the time offset in the Packet8 ATA.
Check with your dial tone provider for a solution.
First make sure that the fax button has been pushed and is llit...
The 2820 should have a handset. In order to use manual transmission (when you get to hear all the beeps and whistles) you will need to load the document then pick up the handset. then dial the number, when you hear the recieving fax tone then hit the start button.
The 2820 should also have a hook hold button pressing this will allow you to hear the dial tone and the numbers you dial along with the receiving fax tone. If you dont hear anything when you press this button then you may want to use the volume buttons to increase the volume.
Also remember that if you have not picked up the handset or pressed he hook/hold button the unit will use automatic mode, which is to say that all you will do is load the document, dial the number, and then press the start button.